到中文版

Professor JianYANG

Jian YANG

PhD, Professor, National Second Class Professor

First Class Professor of “WEICHANG Scholar of Shanghai University”

Leader of Key Innovation Team for New Technologies in Ironmaking and Steelmaking of Shanghai University

Director of Materials Engineering Department

Deputy Director and Secretary General of Metallurgical Artificial Intelligence Technology Branch of Chinese Society for Metals

Deputy Director of Foreign Exchange Working Committee of Chinese Society for Metals

Deputy Director of Metallurgical Reaction Engineering Branch of Chinese Society for Metals

Deputy Editor in Chief of Journal of Iron and Steel Research, International

Deputy Director of Editorial Board of Steelmaking Journal

Deputy Editor in Chief of Continuous Casting Journal

Editorial board member of ISIJ International

Editorial board member of Steel Research International

Editorial board member of Ironmaking & Steelmaking

Editorial Board Member of International Journal of Minerals, Metallurgy and Materials

School of Materials Science and Engineering, Shanghai University

Mailing address: Room 517, Rixin Building, School of Materials Science and Engineering, Shanghai University, No. 333 Nanchen Road, Baoshan District, Shanghai, 200444, P.R. China

E-mail: yang_jian@t.shu.edu.cn

1、 Research Fields

1）Low carbon and high-efficient steelmaking technology: development of new technologies for low-carbon, high-efficient, and low-cost hot metal pretreatment, converter steelmaking, electric arc furnace steelmaking, secondary refining, and residual element removal for high-quality steels;

2）Continuous casting technology for defect free slab or billet: development of slab quality control technology for steel sheet, thick steel plate, and billet quality control technology for long steel products; development of mold flux and new continuous casting technologies;

3）Inclusion control technology for high quality steel: development of inclusion control technology for automotive exposed panel, silicon steel sheet, thick plate steel, special steel, tube steel, etc., and development of oxide metallurgy technology;

4）Metallurgical artificial intelligence technology: big data analysis of metallurgical processes

Photos of members of the research group in October 2025

2. Books

1. Jian YANG, “Oxide Metallurgy", Metallurgical Industry Press, October 2025, ISBN 978-7-5240-0376-2。

2. Jian YANG, "Double Slag Converter Steelmaking", Metallurgical Industry Press, September 2025, ISBN 978-7-5240-0368-7。

3. Research Group Members

3.1. Research Group Members in October 2025

1）Professors: Jian YANG, Tongsheng ZHANG

2）Associate Professors: Yanling GUO, Yinhui ZHANG

3）Postdoctoral fellows: Han SUN, Zhuo CHEN

4）Doctorial students:

4th year: Liang WANG

3rd year: Yanli CHEN, Yuntong LI

2nd year: Yuqi ZHANG, Zhipeng DAI, Jimin ZHAO

5)Master's students:

3rd year: Zhenghao ZHOU, Yang JIAN, Dingding YANG, Xuejiao ZHANG, Zhiwen SHI, Yongbiao SUN, Fengqi ZHOU, Yanjin REN, Shuo SUN

2nd year: Wei DENG, Guopeng YAO, Zihan YANG, Meizhi WANG, Jinzhao MA, Maohui ZOU, Haoran WANG, Shixi ZHAO, Xiaochu TANG

1st year: Haotong LI, Shihao ZENG, Chenchun LIU, Chenyi YANG, Ruichi ZHANG, Yangming XIE, Mengze LI, Xi LU, Yunlong BI, Yifan SHI, Guoqing DUAN

3.2. Research Group Alumni

1)Postdoctoral fellows

Year 2023: Wenkui YANG

Year 2022: Lei WANG

Year 2021: Siwei WU

Year 2020: Tao ZHANG, Longyun XU

Year 2019: Yinhui ZHANG

Year 2015: Yunan WANG

2)Ph.D. candidates

Year 2025: Han SUN, Tingting LI

Year 2024: Runhao ZHANG

Year 2022: Xiaoqian PAN, Dekun LIU

Year 2021: Wenkui YANG

Year 2019: Ruizhi WANG

Year 2018: Longyun XU

3) Master's students

Year 2025: Jinqiao GAO, Yuhong DU, Caiwen ZOU, Zhuo CHEN, Yuhang ZHAO, Xuhui WANG, Xiaofeng QIU

Year 2024: Yanli CHEN, Yuntong LI, Yuqi ZHANG, Zhipeng DAI, Zeyu YANG, Yiming GAI

Year 2023: Jianqiu LIU, Yi GUO, Miaomiao REN, Qing ZHANG, Hailong DU, Zhiqing LIN

Year 2022: Wenjing CAI, Yibo LIU, Tingting LI, Han SUN

Year 2021: Chao MA, Shuyuan HUANG, Yangpeng ZHOU, Runhao ZHANG

Year 2020: Peng JIANG, Gefan YE, Xiaoqian PAN

Year 2015: Xiuling XIN

Year 2014: Longyun XU, Yiquan WU

4)Undergraduates

Year 2025: Ruichi ZHANG, Chenzhe WANG, Liyang CAI

Year 2024: Jie LI, Sijie ZHANG

Year 2023: Yaowen BI

Year 2021: Wenhao TU

Year 2020: Hailin LI

Year 2019: Zhiqing LIN

Year 2018: Runhao ZHANG

4. Resume

1981-1985, Undergraduate degree in Physics from Beijing University of Science and Technology

1985-1988, Master's degree in Ironmaking and Steelmaking from Beijing University of Science and Technology

1988-1991, Assistant Engineer at Changsha Research Institute of Mining and Metallurgy

1991-1996, Engineer at Changsha Reserch Institute of Mining and Metallurgy

1996-1997, Senior Engineer at Changsha Resarch Institute of Mining and Metallurgy, Deputy Director of Battery Materials Factory

1997-1998, Researcher in Materials Engineering at Nagoya University in Japan

1998-1999, Senior Engineer at Changsha Research Institute of Mining and Metallurgy, and Director of Battery Materials Factory

1999-2003, Doctoral student in Materials Engineering Department at Nagoya University in Japan

2003-2004, Teaching assistant in Materials Engineering Department at Nagoya University

2004-2006, Lecturer in Materials Engineering Department at Nagoya University

2006-2007, Associate Professor of Materials Engineering Department at Nagoya University

2008-2016, Chief Researcher at Central Research Institute of Baosteel Group Co., Ltd

2009-2016, Leader of Steelmaking Technology Team at Baosteel Group Co., Ltd

2017-present, Professor of School of Materials Science and Engineering of Shanghai University

2020-present, Director of Department of Materials Engineering at School of Materials Science and Engineering, Shanghai University

2020-present, First Class Professor of "Weichang Scholar of Shanghai University”

2020-present, National Second Class Professor

5. Academic Appointments

1）Deputy Director and Secretary General of Metallurgical Artificial Intelligence Technology Branch of Chinese Society for Metals

2）Deputy Director of Foreign Exchange Working Committee of Chinese Society for Metals

3）Deputy Director of Metallurgical Reaction Engineering Branch of Chinese Society for Metals

4）Deputy Editor in Chief of Journal of Iron and Steel Research, International

5）Deputy Director of Editorial Board of Steelmaking Journal

6）Deputy Editor in Chief of Continuous Casting Journal

7）Editorial board member of ISIJ International

8）Editorial board member of Steel Research International

9）Editorial board member of Ironmaking & Steelmaking

10）Editorial Board Member of International Journal of Minerals, Metallurgy and Materials

11）Member of Steelmaking Branch of Chinese Society for Metals

12）Member of Rare Earth Application Professional Committee of Chinese Rare Earth Society in Steel

13）Editorial Board Member of Journal of Engineering Science

14）Editorial Board Member of the Journal of Iron & Steel

15）Editorial Board Member of Journal of Materials and Metallurgy

16）Editorial Board Member of Shanghai Metal Journal

17）Editorial Board Member of Journal of Metallurgical Automation

18）Part time Professor and Doctoral Supervisor at Shanghai Jiao Tong University

19）Part time Professor and Doctoral Supervisor at Beijing University of Science and Technology

20）Part time Professor and Doctoral Supervisor at Northeastern University

21）Visiting Professor and Doctoral Supervisor at Central South University

22）Member of Special Expert Committee of Shanghai Federation of Returned Overseas Chinese

23）Former member of Academic Committee of Central Research Institute of Baosteel Group Co., Ltd

24）Former member of Technical Committee and Board member of Baosteel Australia Joint Research and Development Center

25）Former Baosteel Group Co., Ltd. "Baosteel Technical Expert"

26）Editorial Board Member of 7th Baosteel Technology, 6th World Steel, and 2nd Baosteel Technology Research

27）Former part-time professor at Talent Development Institute of Baosteel Group Co., Ltd

28）Former member of 7th Council of Baosteel Metal Society

6. Awards

1）In August 2024, China Iron and Steel Industry Association, Chinese Society for Metals, the second prize of Metallurgical Science and Technology Award for "Development and Application of Key Technologies of Steelmaking and Continuous Casting for High Quality Automotive Exposed Panel" (ranked first by the winner and Shanghai University).

2）In July 2024, Shanghai Municipal People's Government, the first prize of Shanghai Science and Technology Award for "Development and Application of Key Technologies of Steelmaking and Continuous Casting for High Quality Automotive Exposed Panel" (ranked first by the winner and Shanghai University).

3）In December 2025, the paper in "China Metallurgy" was selected as one of the top academic papers in the "Top 5000 Chinese Fine Science and Technology Journals" (F5000 Paper of 2024) (Weixing Dai, Jian YANG*, Qiming WANG, Chongde HUANG, Jiahui WU, Yao CHEN, Linhui TANG, Genbao CHEN: Analysis of Defect Causes and Process Optimization in N08811 Corrosion Resistant Alloy Tube Billet Inspection, China Metallurgy, 2024, 34 (3): 102-112.)

4）In September 2025, won Wang Kuancheng Talent Cultivation Award from Shanghai University.

5）In September 2025, the "National University Huang Danian Style Teacher Team" creation demonstration activity was shortlisted, and Jian YANG ranked 3/36.

6）In September 2025, awarded the title of "Good Tutor in My Heart" at the 9th Shanghai University

7）On March 24, 2025, doctoral students Han SUN, Tingting LI, and master's student Xiaofeng QIU were recognized as outstanding graduates in Shanghai.

8）In January 2025, doctoral student Sun Han was selected for the 2024 China Association for Science and Technology Young Talent Support Engineering Doctoral Program (China Nonferrous Metals Society)

9）In December 2024, “Research Progress on the control of Inclusions in Non oriented Silicon Steel Treated with Rare Earth Elements” was awarded the title of "Excellent Paper in the Journal of Iron & Steel in 2022".

10）In March 2024, Jian YANG (person in charge), a key supported project of the Joint Research Fund for Iron and Steel of National Natural Science Foundation of China, entitled with “Research on the low-temperature toughening mechanism of 420-690MPa grade marine steel under Mg and Ca deoxidation conditions through the synergistic regulation of second phase particles and microstructure in HAZ”. The project final result was evaluated as excellent.

11）On January 11, 2024, selected as the Top 5 Outstanding Papers Published in Continuous Casting in 2021 (Yibo LIU Jian YANG*: Progress in Flow Field Control Technology for Tundish, Continuous Casting, 2021), (5)：12-33）。

12）In March 2023, the first prize of Anshan Iron and Steel Group Co., Ltd. Science and Technology Award was awarded for “Research on the formation mechanism and control technology of inclusions in IF steel cold-rolled sheets” (ranked fourth by the completion person).

13）PhD students Xiaoqian PAN (2022), Han SUN (2024), and Tingting LI (2024) were awarded national scholarships.

14）On February 21, 2023, Top Cited Article 2021-2022，Jian Yang whose paper was recognized as a top cited paper in: Steel Research International（Wenkui Yang, Jian Yang*, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Gefan Ye：Effect of Temperature on Dephosphorization of Hot Metal in Double Slag Converter Steelmaking Process by High-Temperature Laboratorial Experiments, Steel Research International, 2020, 92(3): 2000438-2000449.）.

15）On February 21, 2023, Top Cited Article 2021-2022，Jian Yang whose paper was recognized as a top cited paper in Steel Research International(Wenkui Yang, Runhao Zhang, Han Sun, Jian Yang*：Dephosphorization in New Double Slag Converter Steelmaking Process with High-Temperature Laboratorial Experiments, Steel Research International, 2022, 93(1): DOI: 10.1002/srin.202100378.).

16）On December 31, 2022, the best cited paper on Ironmaking & Steelmaking from 2020 to 2022- ranked third (Wenkui Yang, Jian Yang *, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Gefan Ye. Effect of Basicity on Depression of Hot Metal with a Low Basicity Slag at 1653 K, Ironmaking & Steelmaking, 2021, 48 (1), 69-77.)

17）On March 31, 2022, IJMMM ranked among the top 20 cited articles of 2021 (ranked third) (Si wei Wu, Jian Yang *, and Guang ming Cao: Credit of Charpy V-notch Impact Energy of Low Carbon Steel by Using Shallow Neural Network and Deep Learning, International Journal of Minerals, Metallurgy and Materials, 2021, 28 (8): 1309-1320)

18）On March 31, 2022, IJMMM ranked among the top 20 articles cited in 2021 (ranked eighth) (Gefan Ye, Jian Yang *, Runhao Zhang, Wenkui Yang and Han Sun: Behavior of Phosphorus Enrichment in Depression Slag at Low Temperature and Low Basicity, International Journal of Minerals, Metallurgy and Materials, 2021, 28 (1): 66-75.)

19）In March 2022, Jian YANG made significant contributions to the work of the Shanghai Municipal Education Commission in 2021.

20）On February 1, 2021, won the 2020 Outstanding Paper Award from Journal of Iron and Steel Research International（Longyun Xu, Jian Yang*, Ruizhi Wang, Wanlin Wang, Yunan Wang: Effect of Mg Addition on Formation of Intragranular Acicular Ferrite in Heat-affected Zone of Steel Plate after High-Heat-Input Welding, Journal of Iron and Steel Research International, 2018, 25(4): 433-441.）

21）On November 24, 2020, Wenkui Yang, Runhao Zhang, and Han Sun, the doctoral and master's students under my guidance, won the special prize at the 2020 Jiangsu Metallurgical Engineering Innovation Competition for the project "Development of Low Cost Deep Dephosphorization New Process for Converter Clean Steel".

22）On September 10, 2020, received the Outstanding Contribution Award for Scientific Research from Shanghai University.

23）On January 3, 2020, won the 2019 Shanghai University School of Materials Science and Engineering Science and Technology Innovation Award.

24）In May 2018, "Research on Surface Defects of GA Exposed Panel Caused by Steelmaking" won the second prize of the 2018 Metallurgical Science and Technology Award. (Ranked second)

25）On November 28, 2017, the Special Prize for Outstanding Paper of 2016 in the Journal of Continuous Casting (Yang Jian, Ruan Xiaoming, Wang Ruizhi, Zhu Kai, Li Chengbin, Fan Zhengjie: The Influence of Mn Content on the Characteristics of Continuous Casting Billet) was awarded at the 4th National Conference on Continuous Casting Process Technology in Taiyuan, Shanxi Province.

26）On October 31, 2017, "Research on Surface Defects of GA Exposed Panel Caused by Steelmaking" won the second prize of 2017 China Baowu Technology Innovation Major Achievement Award. (Ranked second)

27）On April 27, 2017, won the Best Paper Award of 2017 from Korean Society of Metals and Materials International Journal.

28）On December 28, 2016, the team of steelmaking technology was elected as an innovation team for Chinese enterprises in the overseas Chinese community.

29）On November 8, 2016, awarded the title of Chief Researcher in Baosteel's steelmaking technology field for the fourth time, and was rated as excellent in the previous term.

30）On June 20, 2016, re-elected as the team leader in the steelmaking technology of Baosteel Group Co., Ltd..

31）On May 19, 2016, at the 19th National Steelmaking Conference, "The Effect of Al Content on Inclusions in High Manganese TWIP Steel" was awarded as an excellent paper and selected as the plenary session report.

32）On January 29, 2016, the Steelmaking Technology Team was awarded the 2015 Outstanding Technical Field Team by Baosteel Research Institute.

33）On March 18, 2015, awarded the Nishiyama Memorial Award by Iron and Steel Institute of Japan.

34）On September 12, 2014, selected for the 5th China Overseas Chinese (Innovative Talents) Contribution Award.

35）On September 11, 2014, the steelmaking technology team was awarded the "Advanced Collective Contribution Award" in the "2013 Baosteel Competition.

36）On January 27, 2014, the Steelmaking Technology Team was awarded the Outstanding Technical Field Team of Baosteel Research Institute in 2013.

37）On January 16, 2014, awarded the title of Chief Researcher in Baosteel's steelmaking technology field for the third time, and was rated as excellent in the previous term.

38）In April 2013, re-elected as the team leader in the steelmaking technology field of Baosteel Group Co., Ltd.

39）In January 2013, the Steelmaking Technology Team was awarded the Outstanding Technical Field Team of Baosteel Research Institute in 2012.

40）In January 2013, the "GA Exposed Panel Quality Improvement Research Team" was awarded the title of "Outstanding R&D Team of Baosteel Group in 2012".

41）In September 2012, awarded the title of Outstanding Science and Technology Worker in China's Steel Industry during the Eleventh Five Year Plan period.

42）In January 2012, the Steelmaking Technology Team was awarded the Outstanding Technical Team of Baosteel Research Institute in 2011.

43）In September 2011, awarded the title of "Outstanding Returned Overseas Chinese and Family Members of Central Enterprises" by the Overseas Chinese Federation of Central Enterprises.

44）In March 2011, selected as a weekly star in Shanghai.

45）On January 7, 2011, awarded the title of Chief Researcher in Baosteel's steelmaking technology field for the second time, and was rated as excellent in the previous term.

46）Selected for the China Overseas Chinese Contribution Award (Innovative Talents) in August 2010.

47）In April 2010, selected as one of the "Top Ten Overseas Chinese Scholars" in Shanghai.

48）In October 2009, elected as the team leader of Baosteel Group's steelmaking technology field.

49）On August 1, 2007, hired as the Chief Researcher in Baosteel's steelmaking technology field.

50）In April 2007, hired as a visiting professor at Liaoning University of Science and Technology.

51）SAWAMURA Best Article Award of The Iron and Steel Institute of Japan: March 2002.（J.YANG, S.OZAKI, R.KAKIMOTO, K.OKUMURA, M.KUWABARA and M.SANO: Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Carbothermic Reduction of Magnesium Oxide, ISIJ Int. 41(2001), pp. 945-954.）

52）SAWAMURA Best Article Award of The Iron and Steel Institute of Japan: March 2007. (Z. Z. Liu, Y. Kobashi, K. Nagai, J. Yang and M. Kuwabara: Morphology and Precipitation Mechanism of Copper Sulfide in Strip Casting Low Carbon Steels, ISIJ Int., 46(2006), No. 5, pp. 744-753.)

53）SEM photos revealed on the Cover of Materials Transactions, Vol. 47, September, 2006.(Z. Z. Liu, Y. Kobayashi, J. Yang, K. Nagai and M. Kuwabara: Effect of Nano-scale Copper Sulfide Precipitation on Mechanical Properties and Microstructure of Rapidly Solidified Steel with Tramp Copper Element, Mater. Trans., 47(2006), No. 9, pp. 2312-2320.)

54）Japanese Ministry of Education Scholarship: April 2000 to March 2003 (3 years)

七、Academic conference appointments, plenary session lectures, and invited lectures

1）On June 1, 2027, served as the Chinese-side chairman of the 17th China-Japan Bilateral Steel Technology Symposium jointly organized by Chinese Society for Metals and the Iron and Steel Institute of Japan, held in Shanghai, China.

2）November 2026, 2026 China Symposium on Sustainable Ironmaking and Steelmaking Technology, Nanjing, China, November, Served as the chairman of the conference, organized by Chinese Society for Metals, cohosted by Shanghai University and Beijing University of Science and Technology.

3）On June 10-11, 2024, served as the Chinese-side chairman of the 16th China-Japan Bilateral Steel Technology Symposium jointly organized by the Chinese Society for Metals and the Iron and Steel Institute of Japan, and was held in Miyazaki, Japan.

4）In October 2025, served as the Vice Chairman of the Metallurgical Artificial Intelligence Session at the 15th China Iron and Steel Annual Conference.

5）In November 2025, appointed as the member of International Scientific Committee of the 9th International Conference on High Strength Low Alloy Steels(HSLA Steels 2025)，Nanjing, China, November 3-4, 2025.

6）In July 2025, served as ICS International Advisory Board of 9th International Congress on Science and Technology of Steelmaking (ICS), July. 2-5, 2025, Soul, Korea.

7）In September 2024, served as a member of the Technical Committee and the leader of the steelmaking and continuous casting team at the Asia Steel International Conference 2024.

8）In November 2022, served as The member of International Scientific Committee of the 8th International Conference on High Strength Low Alloy Steels(HSLA Steels 2022)，Nanjing, China, November 9-11, 2022.

9）On January 5, 2022, served as ICS International Advisory Board of AIST 8th International Congress on Science and Technology of Steelmaking (ICS) 2-4 Aug 2022 Montreal, Canada.

10）On June 13-15, 2018, Served as the member of the Technical Committee and Chair of the session at 7th International Congress on the Science and Technology of Steelmaking（ICS 2018） in Venice, Italy

11）On May 12-14, 2015, served as the member of the Technical Committee, Chair of session, and invited speaker at the 6th International Congress on the Science and Technology of Steelmaking in Beijing, China

12）On September 15, 2014, served as the member of the Technical Committee of the "European Steel Environment and Energy Conference" and gave an invited lecture in Middlesbrough, UK

13）In September 2012, served as the international member of the organizing committee, Session chairman, and invited speaker for the 5th Asian Steel Conference in Beijing, China

14）In May 2009, served as the international member of the organizing committee of the "4th Asian Steel Conference" (South Korea) and gave an invited lecture in Busan, South Korea

15）Jian Yang: Continuous Casting Technology for High Surface Quality Automotive Outer Panels, 2025 (26th) National Steelmaking Academic Conference, Jinan, Shandong, May 15, 2025.

16）Jian Yang: Research on steelmaking technology based on machine learning, the 30th National Academic Exchange Conference on Automation Application Technology in 2025, Rizhao, Shandong, May 2025.

17）Jian Yang: Application Technology of Machine Learning in Steelmaking Field, Second Committee Change Conference of Metallurgical Artificial Intelligence Technology Branch, Ansteel, Liaoning, October 29, 2024.

18）Jian YANG, Tingting LI, Yinhui ZHANG, Yanli CHEN, Yuqi ZHANG, Longyun XU, Xiaoqian PAN and Dekun LIU：Oxide Metallurgy Technology for Improving Weldability of HSLA Steel Plates，Asia Steel International Conference 2024, Changsha, China, Sept. 4-7, 2024

19）On August 22-23, 2024, Jian Yang, Runhao Zhang and Xiaofeng Qiu：Application of Machine Learning Technology in Steelmaking Process， The 14th China-Korea Joint Symposium on Advanced Steel Technology, Jeju, Korea.( Invited Report

20）On June 10-11, 2024, Jian YANG, Runhao ZHANG and Han SUN：Thermodynamics and Kinetics of Dephosphorization in Double Slag Steelmaking Process with Low CO₂ Emission, The 16th China-Japan Symposium on Science and Technology of Iron and Steel, Miyazaki, Japan. (Invited lecture)

21）On May 29-31, 2024, Jian Yang, Runhao Zhang, Xiaofeng Qiu, Siwei Wu, Yang Jian: Machine Learning Application Technology in Steelmaking Process, 2024 (25th) National Steelmaking Academic Conference, Xiamen, Fujian. (Plenary lecture)

22）On November 30, 2023, Development of Steel Plates with Excellent HAZ Toughness after HHIW With Mg Deoxidation, The 13th China-Korea Joint Symposium on Advanced Steel Technology, Xiamen, China.

23）On August 24, 2023, Progress on Oxide Metallurgy Technology，2023 International Conference on Secondary Refining and Inclusion Controlling。 (Plenary lecture)

24）On July 28, 2023, Innovative Development Practice and Reflection of Metallurgy Discipline at Shanghai University, the 18th National Metallurgical Dean and Metallurgical Discipline High Level Forum, held in Shenyang. (Plenary lecture).

25）On July 15, 2023, Research Progress at Shanghai University, the 29th National Symposium on Metallurgical Engineering Teaching. in Beijing. (Plenary lecture)

26）On July 1, 2023, the development of converter double slag steelmaking technology was presented at the IJMM Forum on Mineral Metallurgy and Materials Frontiers in Beijing. (Plenary lecture)

27）On June 27, 2023, Oxide metallurgy technology to improve the welding performance of thick plates was presented at the 2023 National Steelmaking Continuous Casting Production Technology Conference in Wuhan. (Plenary lecture)

28）On May 20, 2023, Numerical simulation and experimental verification of the flow field and rolling slag in a crystallizer considering solidified shell and slag layer were conducted at the 22nd Metallurgical Reaction Engineering Academic Conference in Changsha, 2022. (Plenary lecture)

29）On April 27, 2023, The current situation and development of the metallurgical engineering discipline at Shanghai University, the establishment conference of the Undergraduate Education Research Branch of the China Metallurgical Education Society, and the National Symposium on Metallurgical Engineering and Related Professional Construction in Universities were held in Kunming. (Plenary lecture)

30）On April 26, 2023, Low Carbon Double Slag Converter Steelmaking Process and Theory was presented on the 23rd National Steelmaking Academic Conference in Hangzhou. (Plenary lecture)

31）On December 24, 2021, selected as an Outstanding Contribution Expert for 2021 by the editorial board of the International Journal of Minerals, Metallurgy, and Materials.

32）December 15, 2021, 2021 China Symposium on Sustainable Iron- and Steelmaking Technology, Changsha, China, December 15-16, 2021, invited lecture.

33）On December 8th, 2021, The 8th Asia Steel International Conference, Gyeongju, Korea, December 5-9, 2021(invited lecture).

34）On November 9, 2021, The 12th Korea-China Joint Symposium on Advanced Steel Technology, Changsha, China. (invited lecture)

35）On November 12, 2020, invited lecture in the "2020 (22nd) National Steelmaking Academic Conference, Zhanjiang, China.

36）On November 1, 2019, hired as the chairman of the Chinese delegation to the 16th China-Japan Bilateral Steel Technology Symposium in Chongqing, China

37）On October 25, 2018, served as a member of the Technical Committee and Chair of the session at the 2018 China Symposium on Sustainable Steelmaking Technology (CSST 2018), and gave an invited lecture at Tianjin, China

38）On October 22, 2018, gave a keynote speech at The 10th China-Korea Joint Symposium on Advanced Steel Technology in Shanghai, China

39）On August 2-3, 2018, gave a plenary lecture at the "2018 National Steelmaking Continuous Casting Production Technology Conference, Yantai, China

40）On May 17, 2018, gave a plenary lecture at the "2018 (20th) National Steelmaking Academic Conference", Chengdu, China

41）On May 19, 2016, gave a plenary lecture at the "2016 (19th) National Steelmaking Academic Conference", Changsha, China

42）On October 21-23, 2015, served as a member of the academic committee and chairman of the steelmaking session at the 10th China Iron and Steel Annual Conference and the 6th Baosteel Academic Annual Conference in Shanghai, China

43）On October 5-8, 2015, Asian Steel International Conference, Session Chairman, Invited Presentation, Yokohama, Japan

44）On November 24, 2014, gave the keynote speeches and served as the chairman of the plenary session of the "High Quality Steel Continuous Casting Production Technology and Equipment Exchange Conference" in Changsha, Hunan, China

45）On October 10, 2014, The 6th China-Korea Joint Symposium on Advanced Steel Technology, invited lecture and Chairman of the session, Nanjing, China

46）On July 23, 2014, The Second Australia‐China Joint Symposium on Metallurgy，Session Chairman, Sydney, Australia

47）On July 8, 2014, gave a keynote speech on the National Steelmaking Continuous Casting Production Technology Conference, Tangshan, China

48）On May 20, 2014, plenary lecture on the 18th National Steelmaking Academic Conference, Xi'an, China

49）On June 4-6, 2013, served as the member of the International Academic Committee and chairman of the Steelmaking session at the 5th Baosteel Academic Annual Conference, Shanghai, China

50）On October 2012, served as the member of the International Technical Committee, Chairman of the session, and gave invited lecture at the 5th International Congress on Science and Technology of Steelmaking (ICS), Dresden, Germany

51）On November 15-17, 2010, served as the member of the International Academic Committee and chairman of the Steelmaking session at the 4th Baosteel Academic Annual Conference, Shanghai, China

52）On September 26-28, 2008, in charge of the steelmaking sessionof the "Third Baosteel Academic Annual Conference", Shanghai, China.

8. Social Employments

1）Re-elected as a member of the 10th Council of the Shanghai European American Alumni Association in October 2023

2）Continue to serve as a member of the Special Expert Committee of the Shanghai Federation of Returned Overseas Chinese in October 2023

3）In September 2018, re-elected as a member of the 10th Council of the Shanghai Association of European and American Alumni

4）In July 2016, re-elected as the Executive Director of the 9th Council of the Shanghai European American Alumni Association and the President of Baosteel European American Alumni Association

5）Member and Standing Committee Member of the 11th Shanghai Overseas Chinese Federation in August 2015

6）In September 2014, re-elected as the Executive Director of the 9th Council of the Shanghai European American Alumni Association and the President of Baosteel European American Alumni Association

7）Appointed as a member of the Special Expert Committee of the Shanghai Federation of Returned Overseas Chinese in December 2013

8）Elected as Executive Director and Director of the Shanghai European and American Alumni Association in January 2011

9）In September 2010, served as the President of Baosteel Branch of Shanghai European American Alumni Association

10）Elected as a member of the 10th Committee of the Shanghai Overseas Chinese Federation in April 2010

9. Research Projects in Recent Years

1）Government Project, Key Project of the National Natural Science Foundation of China's Steel Industry Joint Research Fund: Research on the Low-Temperature Toughening Mechanism of HAZ Through Synergistic Control of Second-Phase Particles and Microstructure in 420-690MPa Grade Offshore Steel under Mg and Ca Deoxidation Conditions, Principal Investigator. Outstanding Evaluation upon Completion

2）Government Project, National Natural Science Foundation of China General Program, Fundamental Research on Multiphase Slag Metallurgy Behavior in Phosphorus Removal via Dual-Slag Method in Converter Steelmaking, Principal Investigator.

3）Enterprise Corporate Project (Ansteel): Key Technology R&D for High-Surface-Quality Automotive Exposed Panel Continuous Casting, Principal Investigator.

4）Enterprise Corporate Project (Baowu Group), Baosteel Low-Carbon Fund, Key Technology Research on Low-Carbon Smelting of High-Quality Automotive Sheet Steel Using Electric Arc Furnace with Full Scrap Steel, Principal Investigator

5）Enterprise Corporate Project (WISCO), Study on the Distribution Pattern of Inclusions in the Surface Layer of Automotive Sheet Slabs During the Change of Ladles, Principal Investigator.

6）Enterprise Corporate Project (Xingang), Development of Inclusion Evolution and Control Process Technology for Container Plate, Principal Investigator

7）Enterprise Corporate Project(Shougang Jingtang), Analysis and Application of Medium and Large Inclusions in Ultra-Low and Very Low Carbon Automotive Exposed Sheet Continuous Casting Slabs, Principal Investigator.

8）Enterprise Corporate Project(Fujian Qingtuo), Research on Steel Liquid Flow Velocity Measurement and Flow Field Numerical Simulation for Qingtuo Group's Mold Surface, Principal Investigator.

9）Enterprise Corporate Project(Baosteel), Quantitative Analysis of Inclusions in Pipeline Steel, Principal Investigator.

10）Enterprise Corporate Project of Enterprises (Hunan Iron and Steel Group), Research on High-Efficiency Phosphorus Removal Technology for Electric Arc Furnaces in Henggang, Principal Investigator.

11）Enterprise Corporate Project (Shansteel Rizhao), Research and Application Technology Development of Key Technologies for High-Surface-Quality Cold-Rolled Steel Sheet Steelmaking and Continuous Casting, Principal Investigator.

12）Enterprise Corporate Project (Baosteel): Research on Defect-Free Slab Continuous Casting Technology for Ultra-Low Carbon Steel in Baosteel's No. 6 Continuous Casting Machine, principal investigator.

13）Enterprise Corporate Project (Shagang), Research on Flow Field Optimization in Shagang Continuous Casting Machine Mold and Analysis of Slag Inclusion and Skin Flaking Defects, Principal Investigator.

14）Enterprise Corporate Project (Hualing Xianggang), Analysis of Second-Phase Particles and Microstructure in Ultra-Thick Slab Cross-Sections, Principal Investigator.

15）Enterprise Corporate Project(Shougang Qiansteel): Research on the Distribution of Large Inclusions and Ladle Control Technology for Unsteady Continuous Casting Slabs of Automotive Exposed Panels, Principal Investigator.

16）Enterprise Corporate Project(Baosteel): Identification and Evaluation of Surface Defects and Inclusions in Automotive Sheets, Principal Investigator.

17）Enterprise Corporate Project(Hebei Tianzhu Steel), R&D of Low-Cost Clean Steel Platform Technology, Hebei Tianzhu Steel, Principal Investigator.

18）Enterprise Corporate Project (Xingcheng Special Steel): Research on Flow Field Optimization for 150 mm Thick Continuous Casting Mold, Principal Investigator.

19）Enterprise Corporate Project (Xingcheng Special Steel): Research on Austenite Grain Size Stability Control for Gear Steel, Principal Investigator.

20）Enterprise Corporate Project (Baosteel), Research on Inclusion Control Technology for Non-Oriented Silicon Steel, Principal Investigator.

21）Enterprise Corporate Project (Shougang Jingtang), Improvement of Molten Steel Cleanliness in Tundish and Control of Slagging and Peeling Defects, Principal Investigator.

22）Enterprise Corporate Project (Hegang Laoting), Development and Application of Steelmaking and Continuous Casting Technology for Automotive Panel Surface Quality Control, Principal Investigator.

23）Enterprise Corporate Project (Puyang Steel): Research on Wind Tower Plate and Wear-Resistant Steel Inclusion Control Technology, Principal Investigator.

24）Enterprise Corporate Project (Shagang Rongsheng), Optimization of Steelmaking Production Process for High Heat Input Welding Steel, Principal Investigator.

25）Enterprise Corporate Project (Hualing Hengang), Research on Inclusion Control Technology for Cold Drawn Oil Cylinder Steel, Principal Investigator.

26）Enterprise Corporate Project (Ansteel): Research on Steel Quality Defect Control in Continuous Casting Mold of the Fourth Steelmaking Plant, Principal Investigator.

27）Enterprise Corporate Project (Baosteel), Research on Large Inclusions and Segregation in Unsteady Steel Slab, Principal Investigator.

28）Enterprise Corporate Project (Shougang Qiansteel), Optimization of Continuous Casting Process for Automotive Exposed Panels and Development of Steel Quality Defect Reduction Technology, Principal Investigator.

29）Enterprise Corporate Project (Ansteel), Basic Research on Steelmaking Continuous Casting Technology Causing Surface Defects in Automotive Exposed Panels for ASP Steelmaking, Principal Investigator.

30）Enterprise Corporate Project (Ansteel): Study on the Formation Mechanism of Surface Defects in Automotive Exposed Panels for ASP Steelmaking, Principal Investigator.

31）Enterprise Corporate Project (Tangsteel), Research on Key Technologies for Continuous Casting of Automotive Exposed Panels, Principal Investigator.

32）Enterprise Corporate Project (Baosteel Meigang), Effect of Mg Treatment on Inclusions, Microstructure, and Mechanical Properties of Peritectic Steel, Principal Investigator.

33）Enterprise Corporate Project (Ningbo Iron and Steel), Research on Process Optimization of Calcium Treatment for Automotive Steel in Ning Steel, Principal Investigator.

34）Enterprise Corporate Project (HeSteel Hansteel), Development of Steel Quality Defect Control Technology for Automotive Exposed Panels, Principal Investigator.

35）Enterprise Corporate Project (HeSteel Hansteel), Development of a Low-Cost Desulfurization Process for Clean Steel at Hansteel, Principal Investigator.

36）Enterprise Corporate Project (Shougang Jingtang), Research on Slag Inclusion Defect Control Technology for High Casting Speed, Principal Investigator.

37）Enterprise Corporate Project (Shougang Qian'an), Genetic Defect Analysis and Quantification Reduction of IF Steel Continuous Casting Slabs, Principal Investigator.

38）Enterprise Corporate Project (Hualing Liangang), Research on Steelmaking Control Technology for Cold-Rolled Sheet Surface Defects, Principal Investigator.

39）Enterprise Corporate Project (Ningbo Iron & Steel), Development of a Low-Cost De-Sulfurization Process for Clean Steel at Ninggang, Principal Investigator.

40）Enterprise Corporate Project (Baosteel), 3D Characterization of Automotive Exposed Panel Defects and Inclusion Analysis Across the Entire Process, Principal Investigator.

41）Development of Thick Plate Fabrication and Supporting Welding Materials for High Heat Input Welding in Marine Engineering (National Key R&D Program of the 13th Five-Year Plan), Project Leader, July 2016 - December 2020, National.

42）Key Technical Research in Steelmaking, 2016-2019, Principal Investigator, July 1, 2016 - June 30, 2019.

43）Improvement of Steel Quality Defects in IF Steel Automotive Plates,Project Leader, July 1, 2016 - June 30, 2019.

44）Research on Comprehensive Process Technology for Sulfur Removal in Hot Metal Pretreatment Using the KR Method in Steel Plants, Project Leader, November 1, 2015 - December 31, 2017.

45）Key Technology Research in the Steelmaking Field (2013-2015), Principal Investigator, April 1, 2013 - March 31, 2016.

46）Research on New Oxide Metallurgy Processes and Application Technologies, Project Leader, April 1, 2013 - March 31, 2016.

47）Research on Control Technology for GA Exposed Panel Surface Defects Caused by Steelmaking, Project Leader, April 1, 2013 - March 31, 2016.

48）Research on the Smelting and Continuous Casting Technology of Medium-High Manganese Automotive Steel, Project Leader, April 1, 2013 - March 31, 2016.

49）Key Technical Research in the Steelmaking Field (2010-2012), Principal Investigator: April 1, 2010 - December 31, 2014.

50）Improvement of GA Exposed Penal Surface Defects Caused by Steelmaking Slag (Impurities) and Bubbles, Project Leader, April 1, 2010 - March 31, 2014.

51）Development of the Third-Generation Oxide Metallurgy Technology Utilizing Strong Deoxidizers, Project Leader, April 1, 2010 - March 31, 2014.

52）Development of High-Strength Thick-Specification Steel Plates and Welding Technology for High-Energy Welding, Technical Project Leader, May 1, 2009 - December 31, 2011.

53）Development of the Third-Generation Oxide Metallurgy Process Utilizing Strong Deoxidizers: Project Leader, January 1, 2008 - June 30, 2010.

十、近年代表性学术论文

1）Yuqi Zhang, Jian Yang*, Yinhui Zhang: Effect of Ti/N ratio on the second phase particles and toughness of Mg treated ship-building plate steel after welding, Steel Vanadium Titanium, 2026, Accepted.

2）Liang Wang, Jian Yang*, Yin-hui Zhang, Yan-li Chen, Yu-qi Zhang, Han Sun: Unraveling coupling effect of cooling rate and inclusion characteristics on nucleation and growth of intragranular acicular ferrite in Al-Ti-Ca deoxidized HSLA steel, Metallurgical and Materials Transactions B, 2025, Accepted.

3）Mao-hui ZOU, Jian YANG*, Xiaofeng QIU, Wei DENG, Han SUN, Yun-tong Li: Prediction of BOF Endpoint P Content by Optuna-RF with K-Medoids Clustering Based on Metallurgical Parameter Constraint, International Journal of Minerals, Metallurgy and Materials, Accepted.

4）Zhiwen Shi, Jian Yang*, Yutong Li, Yang Jian: Effects of Immersion Nozzle Structure on Flow Field, Solidification, and Inclusion Capture in Narrow and Thin Section Molds Based on High Temperature Quantitative Velocity Measurement, Steelmaking, 2026, accepted.

5）Jimin ZHAO; Jian Yang*; Han SUN*; Zhenghao ZHOU; Liang WANG: Atomistic insights into the short- and medium-range structure and transport properties of EAF slag: the role of iron oxide, Chemical Engineering Science, 2025, Accepted.

6）Xiaofeng Qiu, Jian Yang*, Han Sun, Yuntong Li: BOF endpoint forecasting via informer architecture for multivariate time series data, Metallurgical Research & Technology，2025，Accepted.

7）Xiao-feng Qiu, Jian Yang*, Sun Han, Yun-tong Li, Dynamic endpoint forecasting in BOF process: a JITL-BP approach integrated with steel grade coding, Metallurgical Research & Technology，2025，Accepted.

8）Han Sun, Jian Yang*, Jimin Zhao, Zhenghao Zhou, Tingting Li, Xiaofeng Qiu: Atomistic insight into the wetting behavior of Fe nanoparticles on dicalcium silicate interfaces: morphology and temperature dependence, Powder Technology, 2025, Accepted.

9）Fengqi Zhou , Xiaochu Tang , Tongsheng Zhang* , Peihan Xie , Jian Yang*, Deyong Wang , Zushu Li. The effect of cerium on the modification behavior of sulfides in free-cutting steel. Metallurgical and Materials Transactions B, 2025, Accepted.

10）Dingding Yang, Jian Yang*, Yinhui Zhang, Jianjun Zhi, Jun Yang, Zhiqiang Zhang, Zhengjie Fan: Influence of calcium and magnesium tundish fluxes on the distribution of large inclusions in the transition slab, steelmaking, Accepted.

11）Dingding Yang, Jian Yang*, Yinhui Zhang, Jianjun Zhi, Jun Yang, Zhengjie Fan, Ruizhi Wang, Rongjun Xu: Research progress based on large-scale electrolytic analysis of large inclusions in carbon steel, continuous casting, accepted.

12）Yanli Chen, Jian Yang*, Yinhui Zhang, Longyun Xu, Tingting Li Liang Wang and Yuqi Zhang：The Role of Zr Content in Inclusions and Microstructures to Improve HAZ Toughness in Mg-Ca-Zr Deoxidized Steels after HHIW, Metallurgical and Materials Transactions B, 2026, DOI: 10.1007/s11663-025-03934-9

13）Zhipeng Dai, Zhishun Yang, Jian Yang*, Qingsong Zhang, Qing Yin, Mei ZHANG, Xuhui Wang, Liang Wang: Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars, Steel Research International, 2025, DOI: 10.1002/srin.202500656.

14）Tingting Li, Jian Yang*, Yinhui Zhang, Yanli Chen, Yuqi Zhang, Liang Wang: The Effects of Ca content on intragranular acicular ferrite nucleation in the CGHAZ of Al-Ca-Ti deoxidized shipbuilding steel, Science and Technology of Welding and Joining, 2025, DOI: 10.1177/13621718251386216.

15）Haoran Wang, FengqiZhou, Tongsheng Zhang*, Yusheng Hu, Jian Yang*, Zushu Li: Thermodynamic assessment of CaO-Al2O3-SiO2-Ce2O3 subsystems, Calphad, 2025, doi: https://doi.org/10.1016/j.calphad.2025.102884

16）Liang Wang, Jian Yang*, Yinhui Zhang, Yuqi Zhang, Yanli Chen: Insight into Cu on precipitates, PAG growth and impact toughness of CGHAZ for Ca-Ti deoxidized HSLA steels after HHIW, Metallurgical and Materials Transactions B，2025，DOI: 10.1007/s11663-025-03739-w【二区】

17）Yuntong Li, Zhong Ding, Jian Yang*, Zhuo Chen, Yuhang Zhao, Zhiwen Shi: Effect of Mold Thickness on the Flow Field, Removal and Capture of Bubbles and Inclusions in Slab CC Mold by Numerical Simulation Assisted with High-Temperature Velocity Measurement, Steel Research International, 2025, Doi.org/10.1002/srin.202500382.

18）Yuntong Li, Wenyuan He, Changliang Zhao, Jian Yang*, Zhuo Chen, Yang Jian, and Zhiwen Shi：Numerical Simulation of Mold Flux Entrapment in Slab CC Mold Under Double-Ruler EMBr Condition Assisted with High-Temperature Quantitative Velocity Measurement, Metallurgical and Materials Transactions B， 2025, DOI: 10.1007/s11663-025-03687-5.

19）Liang Wang, Zhong Ding, Jian Yang*, Yinhui Zhang, Yuqi Zhang, Yanli Chen, Fengqi Zhou, Zhipeng Dai：Effect of Cu on CGHAZ Low-temperature Impact Toughness in Ca-Ti Deoxidized HSLA Steels after HHIW: Insights from Inclusions, Microstructures, and Fracture Analysis, Metallurgical and Materials Transactions B, 2025, DOI: 10.1007/s11663-025-03657-x。

20）Jinqiao Gao, Yinhui Zhang*, Jian Yang*, Jian Gong, Fuxiang Huang, Xingwei Pei, Keran Zhu: Distribution of inclusions with different compositions in non steady state replacement blanks for automotive exterior panels, Vanadium Titanium Steel, 2025, accepted.

21）Caiwen Zou, Jian Yang*, Jianjun Zhi, Jun Yang, Zhengjie Fan, Zhiqiang Zhang, Ruizhi Wang: Analysis of strip-shaped steelmaking defects on the surface of electroplated galvanized automotive exposed panels caused by mold flux entrapment, Steelmaking, 2025, accepted.

22）Liang Wang, Jian Yang*, Yin-hui Zhang, Yan-li Chen1, Yu-qi Zhang, Longyun Xu: Fracture Mechanisms of CGHAZ for Mg and Ca-Mg deoxidized HSLA steels after HHIW Based on Microstructures, Crack Behaviors and Mechanical Properties, Journal of Iron and Steel Research International，2025, DOI: 10.1007/s42243-025-01571-9.

23）Xuhui Wang, Jian Yang*, Qingsong Zhang, Wenhao Li, Qing Yin, Weikun Wang, Mei Zhang*: Effect of Hot Deformation Behavior on MnS Inclusions in 20MnCr5 Gear Steel Hot Rolled Rod, Vanadium Titanium Steel, 2025, accepted.

24）Zhuo Chen, Jian Yang* , Yuhang Zhao,Yuntong Li, Jian Gong, Fuxiang Huang, Xingwei Pei, Keran Zhu, Fenggang Liu and Zhentong Liu：Influence of Electromagnetic Stirring on the Flow Field and Argon Bubble Distribution in the Continuous Casting Mold of Slab Based on High-Temperature Online Measurement of Flow Velocity near the Mold Surface, Metallurgical Research & Technology，Accepted.

25）Zhuo Chen, Jiajing Zhang, Xiting Li, Weitong Du, Jianchao Ma, Jian Yang*: A critical review on the challenges of developing continuous casting mold fluxes for high-Ti steels, International Journal of Minerals, Metallurgy and Materials, Accepted

26）Yuqi Zhang, Jian Yang*, Yin-hui Zhang, Liang Wang, Ting-ting Li and Yan-li Chen: Effect of Zr Addition on Inclusions, Microstructures, and Toughness in the Heat-Affected Zone of Mg Deoxidized Ship Steel after High Heat Input Welding, Science and Technology of Welding and Joining, 2025, DOI:10.1177/13621718251340166.

27）Yuntong Li, Jian Yang*, Han Ma, Yanzhao Zhou, Jianchao Ma*, Jiaqi Zhao, Zhuo Chen, Yuhang Zhao and Zhiwen Shi: Study on mold flux entrapment by numerical simulation, water modeling and high-temperature quantitative velocity measurement, Steel Research International, 2025, 96(5)：DOI: 10.1002/srin.202401066.

28）Tingting Li, Jian Yang*, Yinhui Zhang, Han Sun, Pengfei Hu and Longyun XU: Deterioration mechanism of impact toughness in the coarse-grained heat-affected zone of Ca-treated shipbuilding steel plate with high-Cr content, Journal of Alloys and Compounds, 2025, 1024(4): DOI: 10.1016/j.jallcom.2025.180194.

29）Wang Xuhui, Yang Jian *, Zhang Qingsong, Baiyun, Lu Mingxia, Yin Qing, Wu Xiaolin, Zhang Yinhui: Influence of Manganese Sulfur Ratio on the Precipitation Behavior of Inclusions in 20MnCr5 Gear Steel Hot Rolled Rod, Rolling, 2025, accepted.

30）Du Yuhong, Yang Jian *, Zhang Yinhui, Zhi Jianjun, Yang Jun, Zhang Zhiqiang, Fan Zhengjie: Effects of Ladle Exchange on the Distribution of Various Inclusions in Automotive Exposed Panel Continuous Casting Slab, Steelmaking, 2025, accepted.

31）Gao Jinqiao, Yang Jian *, Gong Jian, Huang Fuxiang, Pei Xingwei, Zhu Keran, Liu Fenggang, Liu Zhentong: Distribution of Inclusion Content and Size in Steady State Transition Slabs of Automotive Exposed Panel, Continuous Casting, 2025, accepted.

32）Zou Caiwen, Yang Jian *, Zhang Yinhui, Zhao Jiaquan, Xu Yang, Wang Pengfei, Wang Yanbing, Zhang Mingnan: Influence of Oxygen and Sulfur Content on the Evolution of Inclusions in Low Carbon Steel Continuous Casting Process, Steelmaking, 2025, accepted.

33）Zhao Yuhang, Yang Jian *, Liu Haichun, Ju Weifeng, Wang Pengfei, Li Xiaoming, Zhang Tongsheng *, Li Yuntong, Chen Zhuo: Influence of air curtain barrier and "V" - shaped porous barrier on the flow field and temperature field of irregular three flow tundish, Steelmaking, 2025, accepted.

34）Liang Wang, Jian Yang*, Yinhui Zhang, Yuqi Zhang, Yanli Chen, Zhipeng Dai, and Tingting Li: Insight into Ca Addition on Phase Transformation in CGHAZ of Mg Deoxidized Shipbuilding Steel Plates with In-situ Observation, Metallurgical and Materials Transactions B, 2025, DOI: 10.1007/s11663-025-03578-9.

35）Zhuo Chen, Jian Yang*, Kefeng WANG, Guorong ZHU, Xianjin SUN, Tongsheng Zhang*, Yuhang Zhao and Yuntong Li：Numerical Simulation of the Flow Field and Inclusion Entrapment in Ultra-wide Slab Continuous Casting Mold Combined with High-temperature Velocity Quantitative Measurement, Steel Research International，2025, doi: https://doi.org/10.1002/srin.202401040.

36）Han Sun, Jian Yang*, Tongsheng Zhang*, Dawei Cai, Yang Peng, Jianxiong Mo, Du Zhang, Jianhua Wang: Deeply understanding the physicochemical properties of LCDSP slag from atomic structure to macroscopic properties: A blueprint for the green and low-carbon steelmaking process, Journal of Materials Research and Technology, 2025, 36: 2799-2820.

37）Chi Yunguang, Chen Yanli, Xu Longyun, Yang Jian *: Effect of Ti on the Welding Heat Affected Zone of Ti Ca Deoxidized Steel for High Hear Input Welding, China Metallurgy, 2025, 35 (4) 67-79.

38）Fengqi Zhou, Tongsheng Zhang*, Jian Yang*, Han Sun, Xiaochu Tang, ZuShu Li: The Effect of Cerium Addition on the Growth Mechanism of Manganese Sulfide in Free Cutting Steel, Ceramics International, 2025, 51(8):10628-10642.

39）Gai Yiming, Xu Longyun, Yang Jian *: Distribution of inclusions and formation mechanism of central cracks in the thickness direction of thick slab, Steelmaking, 2025, 41 (1): 63-73.

40）Du Yuhong, Yang Jian *, Zhang Yinhui, Yang Jun, Zhi Jianjun, Zhang Zhiqiang, Fan Zhengjie, Wang Ruizhi, Xu Rongjun: Effect of Ladle Exchange on the Content and Size of Inclusions in Automotive Exposed Panel Continuous Casting Slab, Steelmaking, 2025, accepted.

41）Yuqi Zhang, Jian Yang*, Yin-hui Zhang, Liang Wang, Ting-ting Li, Yan-li Chen and Rong-bin Li：Effect of Holding Time on Prior Austenite Grain Sizes and TiN Particles in Mg-Treated Steels Used for HHIW at the High Temperature of 1350 °C, Journal of Materials Engineering and Performance, 2025, DOI: 10.1007/s11665-025-11068-x.

42）Dai Zhipeng, Yang Jian *, Zhang Qingsong, Zhang Yinhui, Baiyun, Wu Xiaolin: Influence of grain growth behavior and precipitation phases on Nb microalloyed gear steel, Steelmaking, 2025, 41 (1): 95-104.

43）Liang Wang, Jian Yang*, Yinhui Zhang, Yanli Chen, Yuqi Zhang and Longyun Xu: Fracture Mechanism of CGHAZ for Mg and Ca-Mg deoxidized HSLA steels after HHIW Based on Microstructures, Crack Behaviors and Mechanical Properties，Journal of Iron and Steel Research International，2025, 已录用。

44）Yuntong Li, Jian Yang*, Yibo Liu, Qun Sun, Yang Lin, Lin, Lin Du and Jin-song Meng: Numerical simulation of flow field in continuous casting slab mould under EMS conditions assisted with high-temperature quantitative velocity measurement, Ironmaking & Steelmaking，2025，DOI: 10.1177/03019233241310714.

45）Yuqi Zhang, Yinhui Zhang*, Jian Yang*, Tingting Li，Yanli Chen and Rongbin Li: Effect of Ti/N Ratio on TiN Particles, Prior austenite grains and Toughness of HAZ of Steel Plates with Mg Deoxidization after High Heat Input Welding, Journal of Iron and Steel Research International，2025，DOI: 10.1007/s42243-025-01482-9已录用。

46）Tingting Li, Jian Yang*, Yinhui Zhang, Han Sun, Yanli Chen and Yuqi Zhang: Effect of Al content on nanoprecipitates, austenite grain growth and toughness in coarse-grained heat-affected zones of Al–Ti–Ca deoxidized shipbuilding steels, International Journal of Minerals, Metallurgy and Materials, 2025, 32(4): 879-891.

47）Xiaofeng QIU, Runhao ZHANG, and Jian YANG*: Prediction of BOF endpoint carbon content and temperature via CSSA-BP neural network model, Journal of Iron and Steel Research International, 2025, 32(3): 578-593.

48） Baiyun, Yang Zeyu, Li Yutong, Sun Xianjin, Wang Kefeng, Zhu Guorong, Lin Zhiqing, Yang Jian *: Influence of Immersion Depth on Mold Flow Field Based on Mathematical Simulation and High Temperature Velocity Measurement, Continuous Casting, 2025, 44 (02): 83-90.

49）Yanli Chen, Jian Yang*, Yinhui Zhang, Tingting Li, and Yuqi Zhang：Effect of Ti/N Ratio on Inclusions, Microstructure, and Toughness of Heat-Affected Zone of Steel Plate After High Heat Input Welding with Ca Deoxidization，Journal of Sustainable Metallurgy, 2025，DOI: 10.1007/s40831-024-00996-y。

50）Yuntong Li, Jian Yang*, Changliang Zhao, Wenyuan He, Yanqiang Liu，Yi Guo and Zeyu Yang: Numerical simulation of flow field, distribution of bubbles and inclusions in slab continuous casting mold under EMBr assisted with high temperature quantitative velocity measurement, Steel Research International, 2025, 96(1): DOI10.1002/srin.202400167.

51）Zhao Yuhang, Yang Jian *, Zhang Tongsheng: Latest progress in physical simulation of flow field, slag entrapment and non steady state processes in slab continuous casting mold, Steelmaking, 2025, 41 (3): 1-18.

52）Du Hailong, Zhang Yinhui *, Yang Jian *, Zhang Yu, Zhang Yuqi: Characteristic analysis of inclusions, microstructure, and toughness in CGHAZ of Mg deoxidized HSLA steel in industrial experiments, China Metallurgical Digest, 2024, 38 (3): 49-53

53）Qian Gang, Sun Xianjin, Yang Zeyu, Li Yuntong, Baiyun, Zhu Guorong, Wang Kefeng, Lin Zhiqing, Yang Jian *: Influence of argon flow rate and immersion depth on the flow field behavior of the mold based on mathematical, physical simulation and high-temperature velocity measurement, Shanghai Metal, 2024, accepted.

54）Yuqi Zhang, Yinhui Zhang*, Jian Yang*, Tingting Li, Yanli Chen and Liang Wang: Effect of Ti/N Ratio on the Phase Transformation, Secondary Cracks, and Low-Temperature Toughness in Heat-Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation, JOM, 2024, 77(2): 872-883.

55）Zhipeng DAI, Jian YANG*, Qingsong ZHANG, Yun BAI, Mingxia Lu: Effect of Nb Content on the Abnormal Grain Growth in 20MnCr5 Hot-Rolled Bar, Steel Research International, 2024, DOI: 10.1002/srin.202400487.

56）Liang Wang, Jian Yang*, Yuqi Zhang, YinhuiZhang, Tingting Li, Yanli Chen： Effect of Ca Addition on Inclusions, Microstructures, and Impact Toughness of Coarse-Grained Heat-Affected Zone After High-Heat Input Welding in Mg-Deoxidized Shipbuilding Steel Plates, Steel Research International, 2024, DOI: 10.1002/srin.202400539.

57）Yanli Chen, Jian Yang*, Yinhui Zhang, Tingting Li, and Yuqi Zhang: Microstructure and Fracture Characteristics of HAZs of Ca- deoxidized Steel Plates with Different Ti/N Ratios After HHIW, Metals and Materials International, DOI：10.1007/s12540-024-01838-y.

58）Yang Zeyu, Yang Jian *, Zhao Yuhang, Li Yuntong: Influence of Flow Control Devices Based on Numerical Simulation and Water Simulation on the Flow Field of Large Double Strand Tundish, Steel Vanadium Titanium, 2004, 46 (03): 132-139+148.

59）Yuntong Li, Jian Yang*, Zeyu Yang, Zhuo Chen, Jianqiu Liu: Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold, Metals，2024, 14(7): 742. DOI10.3390/met14070742.

60） Han Sun, Jian Yang*, Tongsheng Zhang*, Tingting Li, and Runhao Zhang: Insight into the TiO2 on transport behavior and heat transfer of the CaO-SiO2-FeO-MgO system at different basicities: molecular dynamics simulation and thermodynamics, Ceramics International, 2024, 50(20): 37589-37606.

61）Yuntong Li, Jian Yang*, Zeyu Yang, Zhuo Chen, Jin-song Meng, Qun Sun, Yang Lin and Lin Du: Comparison of the Flow Field in the Slab Continuous Casting Mold Between the Two- and Three-Hole Nozzles with High Temperature Quantitative Velocity Measurement and Numerical Simulation, JOM, 2024, 76 (12): 6972-6985.

62）Yang Zeyu, He Wenyuan, Zhao Changliang, Zhao Yuhang, Li Yuntong, Lin Zhiqing, Yang Jian *: Influence of water simulation based flow control device on the flow field of double strand slab tundish, Steelmaking, 2024, 40 (6): 41-51.

63）Gai Yiming, Xu Longyun, Zhang Tongsheng, Yang Jian *: Analysis of the morphology of the original slag of the mold flux and the mineral phase structure of the continuous casting agglomeration sample, Steelmaking, 2024, 40 (6): 62-68,82

64）Yanli Chen, Jian Yang*, Yinhui Zhang, Tingting Li, and Yuqi Zhang: Effect of Ti/N Ratio on TiN Particles, Microstructures, and Toughness of Heat-Affected Zone After High Heat Input Welding of the Ca-Treated Steel Plates, Steel Research International, 2024, 95(7): DOI: 10.1002/srin.202400038.

65）Yang Zeyu, Yang Jian *, Li Yuntong, Lin Zhiqing: Influence of pulling speed on the flow field behavior of argon blown mold based on mathematical and physical simulation and high-temperature velocity measurement, Steelmaking, 2024, 40 (5): 69-80.

66）Han Sun, Jian Yang*, Runhao Zhang: Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in LCDSP with Industrial Experiments, Mineralogy, and Ion-Molecule Coexistence Theory，Steel Research International, 2024, 95(3) DOI:10.1002/srin.202300853

67）Han Sun, Jian Yang*, and Runhao Zhang: Composition Engineering on the Structure and Transport Properties of CaO-SiO2-P2O5 System: A Computational Insight, Metallurgical and Materials Transactions B, 2024, 55(3): 1812-1829.

68）Han Sun, Jian Yang*, Wenkui Yang*, and Runhao Zhang: Phosphorus Removal Properties of the Fe-C-Si-Mn-P-S Metallic Melts Based on the Atom-Molecule Coexistence Theory: Mutual Verification by Industrial and Laboratorial Experiments， Metallurgical and Materials Transactions B, 2024, 55(3): 1869-1880.

69）Tingting Li, Jian Yang*, Yuqi Zhang, Yanli Chen, Yinhui Zhang*, Longyun Xu and Rongbin Li: Effect of Al content on Inclusions and Microstructures in CGHAZ of Ca Deoxidized Steel Plates after HHIW, Journal of Materials Research and Technology, 2024, 30(3): 174-186.

70）Runhao Zhang, Jian Yang*, Longyun Xu, Liang Wang, Han Sun, Wenkui Yang, Jinqiao Gao: Dephosphorization Kinetics of Hot Metal at Low Slag Basicity and Low Temperature under the Different Fe2O3 Addition Amounts, Steel Research International, 2024, 95(1): http://doi.org/10.1002/srin.202300661。

71）Han Sun, Jian Yang*, Runhao Zhang, Longyun Xu：Insight into the structure and transport properties of CaO-SiO2-P2O5 system during the phosphorus enrichment process: A molecular dynamics simulation, Journal of Non-Crystalline Solids, 2024, 627(3): DOI: 10.1016/j.jnoncrysol.2023.122818.

72）Wang Liang, Yang Jian *, Zhang Tongsheng: Research progress on effect of slag control on inclusions in ultra-low carbon IF steel smelting process, Steelmaking, 2024, 40 (2): 1-22.

73）Tingting Li, and Jian Yang*：Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements，International Journal of Minerals, Metallurgy and Materials, 2024, 31(6): 1263-1284.

74）Runhao Zhang, Jian Yang*, Wenkui Yang*, Han Sun：Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism, International Journal of Minerals, Metallurgy and Materials, 2024, 31 (3): 508-517.

75）Du Hailong, Zhang Yinhui *, Yang Jian *, Zhang Yu, Zhang Yuqi: Characteristic analysis of inclusions, microstructure, and toughness in CGHAZ of Mg deoxidized HSLA steel in industrial experiments, Steelmaking, 2024, 40 (2): 89-94.

76）Dai weixing, Yang Jian *, Wang Qiming, Huang Chongde, Wu Jiahui, Chen Yao, Tang Linhui, Chen Genbao: Analysis of Defect Causes and Process Optimization in N08811 Corrosion Resistant Alloy Tube Billet Inspection, China Metallurgical, 2024, 34 (3): DOI: 10.13228/j.boyuan.issn1006-9356.20230624

77）Miaomiao Ren, Jianjun Zhi, Zhengjie Fan, Jun Yang, Ruizhi Wang, Yanli Chen and Jian Yang*: Distribution of Large Size Inclusions in Transition Slabs of Continuous Casting for Automotive Exposed Panel Steel, Steel Research International, 2023, 94(10): DOI: 10.1002/srin.202300225.

78）Yi Guo, Jian Yang* and Jianqiu Liu：Optimization of Port Angle for Narrow Width Mold Flow Field under High Casting Speed Based on Large Eddy Simulation and High-Temperature Measurement of Velocity near the Mold Surface，Steel Research International，2023, 94(10): DOI: 10.1002/srin.202300346.

79）Yuqi Zhang, Yinhui Zhang*, Jian Yang*: Influence of Ti/N Ratio on Inclusions, Microstructures and Toughness in Heat-Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation after High Heat Input Welding, Steel Research International, 2023，94(9): https://doi.org/10.1002/srin.202300283.

80）Dai Zhipeng, Yang Jian *, Zhang Qingsong, Baiyun, Wu Xiaolin: Research progress on austenite grain growth and second phase particle control technology in automotive gear steel, Journal of Engineering Science, 2023, 45 (11): 1878-1895.

81）Runhao Zhang and Jian Yang*：State of the art in applications of machine learning in steelmaking process modeling, International Journal of Minerals, Metallurgy and Materials, 2023, 30(11): 2055-2075.

82）Jianqiu Liu, Yibo Liu, Qun Sun, Yang Lin, Lin Du, Jinsong Meng and Jian Yang*：Numerical simulation of transient submerged entry nozzle clogging with Euler-Euler and Euler-Lagrange frameworks, Metallurgical and Materials Transactions B，2023, 54B(10)，2629–2650.

83）Qing Zhang, Jian Yang*, and Tingting Li：Effect of Al2O3 Inclusions or Mold Flux Particles on Their Surrounding Microstructures of Sliver Defects on The Surface of Automobile Exposed Panel，Metals, 2023, 13(4), 661. https://doi.org/10.3390/met13040661.

84）Yang Wenkui, Song Jingling, Zhou Xuan, Zhu Qinggui, Li Henghua, Liu Heping, Yang Jian *: Distribution pattern of inclusions in aluminum deoxidized 25Mn steel round castings, Steelmaking, 2023, 39 (04): 1-12.

85）Gai Yiming, Yang Jian *: Progress in LF refining and silicon controlled desulfurization technology for low silicon steel grades, Steelmaking, 2023, 39 (03): 1-15.

86）Zhang Yuqi, Zhang Yinhui, Yang Jian *: Effect of Mg treatment on the second phase particles, HAZ microstructure, and toughness in thick plates, Steelmaking, 2023, 39, (02): 1-17+35。

87）Chen Yanli, Yang Jian *: Latest progress in oxide metallurgy technology using Ca, Zr, and rare earths, Steelmaking, 2023, 39 (01): 1-16.

88）Qing Zhang, Jian Yang*, Tingting Li, Jian Gong, Fuxiang Huang, Keran Zhu, Fenggang Liu, and Zhentong Liu: Characteristics of Inclusions and Microstructures around Solidification Hook of Low-carbon Steel Continuous Casting Slab, Metallurgical and Materials Transactions B，2023, 54B(10): 2439-2453.

89）Hailong Du, Yinhui Zhang*, Yuqi Zhang and Jian Yang*: Effect of Mo content on impact toughness of CGHAZ in offshore engineering steels at different low temperatures, Metallurgical Research & Technology, 2023, 120(3): DOI: 10.1051/metal/2023034.

90）Tingting Li, Jian Yang*, Yinhui Zhang, Yanli Chen and Yuqi Zhang: Particles, Microstructures and Impact Toughness of CGHAZ of Ca Deoxidation Shipbuilding Steel Plates with Different Nb Contents, Steel Research International, 2023，94(4): https://doi.org/10.1002/srin.202300020

91）Han Sun, Wenkui Yang*, Runhao Zhang and Jian Yang*: Phosphorus Enrichment Capacity of Calcium Silicates in Multiphase Dephosphorization Slag Based on Laboratory High Temperature Experiments and IMCT, Metallurgical and Materials Transactions B, 2023, 54 (4) , pp.1739-1767.

92）Wenkui Yang, Jian Yang*, Han Sun, Runhao Zhang, Jingling Song, Yinghui Zhao and Xuan Zhou: Formation and Evolution Mechanism of the Inclusions of Al2O3·SiO2·CaO and Al2O3·SiO2·CaO·MgO in Seamless Steel Tube Steel, Steel Research International, 2023, 94(8): https://doi.org/10.1002/srin.202300106.

93）Zhiqing Lin, Jian Yang*, Fuxiang Huang, Keran Zhu, Jian Gong, Zhentong Liu, Fenggang Liu：Influence of Casting Speed Change and Submerged Entry Nozzle Offset on Mold Flow Field in Unsteady-state Continuous Casting Process，Metallurgical Research & Technology, 2023, 120(2): DOI: 10.1051/metal/2023020.

94）Tongsheng Zhang, Fanfu Wu, Jian Yang*: Effect of basicity on the flow and crystallization behavior of synthetic nickel–iron alloy residue, Ceramics International, 2023, 49 (11): 17067-17073.

95）Dekun Liu, Jian Yang*, Yinhui Zhang: Effect of Boron Content on Microstructure and Impact Toughness in CGHAZ of Shipbuilding Steel Plates with Ca Deoxidation, Steel Research International, 2023, 94(1): DOI: 10.1002/srin.202200278.

96）Miaomiao Ren, Jianjun Zhi, Zhengjie Fan, Ruizhi Wang, Yanli Chen and Jian Yang*: Influence of Ladle Exchange on Inclusions in Transition Slabs of Continuous Casting for Automotive Exposed Panel Steel, Metals, 2023, 13(2):404. DOI: 10.3390/met13020404.

97）Han Sun, Jian Yang*, Wen-kui Yang* and Run-hao Zhang: Comprehensive Evaluation of Phosphorus Enrichment Capacity for Decarburization Slag at Different Temperatures Based on Industrial Experiments, IMCT and Mineral Phase Analysis, Metallurgical and Materials Transactions B，2023, 54(1): 115-145.

98）Wenjing Cai, Jian Yang*, Liqin Deng, Kanglin Zuo and Xufeng Wu: Mechanism of Improvement on the Transverse Corner Crack of Peritectic Steel Slab with Mg Treatment, Metallurgical Research & Technology, 2022, https://doi.org/10.1051/metal/2022081.

99）Runhao Zhang, Jian Yang*, Siwei Wu, Han Sun, Wenkui Yang: Comparison of the Prediction of BOF End-point Phosphorus Content among Machine Learning Models and Metallurgical Mechanism Model, Steel Research International，2022, 93(11): https://doi.org/10.1002/srin.202200682.

100）Han Sun, Jian Yang*, Wenkui Yang and Runhao Zhang：Evaluation of Phosphorus Enrichment Capacity of CaO-SiO2-FeO-MgO-MnO-P2O5-Al2O3 Dephosphorization Slag Based on IMCT，Steel Research International, 2022, 93(11): DOI: 10.1002/srin.202200662.

101）Yinhui Zhang, Jian Yang*, Dekun Liu and Xiaoqian Pan: Effect of Ca Deoxidation on Toughening of Heat-Affected Zone in High-Strength Low-Alloy Steels after Large-Heat-Input Welding, Metals，2022, 12(11): DOI: 10.3390/met12111830.

102）Xiaoqian Pan, Jian Yang*, Yinhui Zhang1 and Rongbin Li：Effect of Si content on the microstructures and toughness in heat affected zone of offshore engineering steels with Mg deoxidation, Steel Research International, 2022, 93(11): https://doi.org/10.1002/srin.202200534.

103）Lei Wang, Jian Yang*, YiBo Liu: Implementation and verification of a Quasi-Eulerian-Eulerian-IATE model for high-efficient prediction of polydispersed bubbly flows in a continuous casting mold, Chemical Engineering Science. 2022, 261(11): DOI: 10.1016/j.ces.2022.117930

104）Yang Wenkui, Yang Jian *, Song Jingling, Li Henghua, Zhou Xuan, Liu Heping: Formation mechanism of wall defects in oil casing steel tubes, Journal of Engineering Science, 2022, 44 (09): DOI: 10.13374/j.issn2095-9389.2022.01.11.002

105）Xiaoqian Pan, Jian Yang*, and Yinhui Zhang：Effect of B Segregation at PAGBs on Microstructures and Toughness in HAZ of Mg Deoxidized Shipbuilding Steel Plates, Steel Research International, 2022，93(8): DOI: 10.1002/srin.202200102.

106）Yang Jian, Li Tingting: Research progress on inclusion control in rare earth treated non oriented silicon steel, Iron & Steel, 2022, 57 (07): DOI: 10.13228/j.boyuan.issn0449-749x.20220054. Outstanding Paper in the Journal of Steel in 2022.

107）Dekun Liu, Jian Yang*, Yinhui Zhang* and Rongbin Li：Effect of the C and Si Contents on Microstructure and Impact Toughness in CGHAZ of Offshore Engineering Steel，Metallurgical Research & Technology，2022, 119(6): https://doi.org/10.1051/metal/2022087.

108）Lei Wang, Jian Yang*, Yibo Liu: Numerical investigation for effect of polydisperse argon bubbles on molten steel flow and liquid slag entrapment in a slab continuous casting mold using multifluid-IATE-VOF model, Metallurgical and Materials Transactions B, 2022, 53B(6): 3707-3721.

109）Yi Guo, Jian Yang*, Yibo Liu*, Wenyuan He, Changliang Zhao and Yanqiang Liu: Numerical Simulation of Flow Field, Bubble Distribution and Solidified Shell in Slab Mold under Different EMBr Conditions Assisted with High-Temperature Quantitative Velocity Measurement, Metals 2022, 12(6): 1050, https://doi.org/10.3390/met12061050.

110）Runhao Zhang, Jian Yang*, Wenkui Yang*, Han Sun：Kinetics of Dephosphorization in double slag converter steelmaking process at different temperatures with industrial experiments and laboratorial experiments，Metallurgical and Materials Transactions B，2022，53B(5): 3013-3024.

111）Han Sun, Jian Yang*, Runhao Zhang and Wen-kui Yang: Influence of Temperature on Dephosphorization at Lower basicity and Lower Temperature Based on Industrial Experiments and IMCT, ISIJ International, 2022, 62(6): 1078–1090.

112）Xiaoqian Pan, Jianjun Zhi, Zhengjie Fan, Yinhui Zhang, Rongbin Li, and Jian Yang*: Morphology and Crystallography of Microstructures in Mg-Deoxidized Offshore Engineering Steels after Simulated Welding Thermal Cycles, Ironmaking and Steelmaking, 2022, 49(5): 541-553.

113）Wenjing Cai, Liqin Deng, Jian Yang*, Kanglin Zuo, and Xufeng Wu: Characteristics and Evolution of Inclusions in Ti-Bearing Peritectic Steel with Mg Treatment, Steel Research International, 2022, 93(5): DOI: 10.1002/srin.202100668

114）Dekun Liu, Jian Yang*, Yinhui Zhang, and Longyun Xu: Effect of Mo Content on Nano-Scaled Particles, Prior Austenite Grains and Impact Toughness of CGHAZ in Offshore Engineering Steels, Journal of Iron and Steel Research International, 2022, 29(5): 846-858.

115）Ting-ting Li, Jian Yang*, Guang-bang Li, Wei Kang, Yang Lin, Jin-song Meng: Characteristics of sliver defects caused by mould flux entrainment on the surface of the hot-dip galvanised automobile exposed panel, Ironmaking & Steelmaking, 2022, 49(5): 456-471.

116）Dekun Liu, Jian Yang*, Yinhui Zhang：Toughness and fracture mechanism at low temperature of offshore engineering steel at different welding heat inputs，Metallurgical Research & Technology, 2022，119(4)： 405. https://doi.org/10.1051/metal/2022041.

117）Han SUN and Jian YANG*: Evolution behaviour and modification mechanism of inclusions in NM500 wear-resistant steel with calcium treatment, Ironmaking & Steelmaking, 2022, 49(8): 795-812.

118）YiBo Liu, Jian Yang* and Zhiqing Lin：Mathematical Modeling of Mold Flow Field and Mold Flux Entrainment Assisted with High Temperature Quantitative Velocity Measurement and Water Modeling，Metallurgical and Materials Transactions B, 2022, 53B(4), 2030-2050. https://doi.org/10.1007/s11663-022-02495-5.

119）Xiaoqian Pan, Jian Yang*, and Yinhui Zhang： Microstructure Evolution in Heat-Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation Containing Different Nb Contents, Metallurgical and Materials Transactions A, 2022, 53A(4): 1512-1528.

120）Dekun Liu, Jian Yang*, Yinhui Zhang: In-situ Observation of Bainite Transformation in CGHAZ of 420 MPa Grade Offshore Engineering Steel with Different Mo Contents, ISIJ International, 2022, 62 (4): 714–725.

121）Yibo Liu, Jian Yang*, Chao Ma, Tao Zhang, Fubin Gao, Taiquan Li, Junli Chen: Mathematical Modelling of Flow Field in Slab Continuous Casting Mold Considering Mold Powder and Solidified Shell with High Temperature Quantitative Measurement, Journal of Iron and Steel Research International, 2022, 29(3): 445-461.

122）Wenkui Yang, Runhao Zhang, Han Sun, Jian Yang*：Dephosphorization in New Double Slag Converter Steelmaking Process with High-Temperature Laboratorial Experiments, Steel Research International, 2022, 93(1): DOI: 10.1002/srin.202100378.（Top cited article 2021-2022 in Steel Research International）

123）Zhang Runhao, Yang Jian *, Ye Gefan, Sun Han, Yang Wenkui: The latest progress in converter dephosphorization process, Steelmaking, 2022, 38 (1): 1-13.

124）Jianqiu Liu, Jian Yang*, Chao Ma, Yi Guo, Wenyuan He, Changliang Zhao, Renbo Jiang, Yintao Guo: Effect of Mold Width on the Flow Field in a Slab Continuous-Casting Mold with High-Temperature Velocity Measurement and Numerical Simulation, Metals, 2021, 11(12): 1943-1961.

125）Yibo Liu, Jian Yang*, Fuxiang Huang, Keran Zhu, Fenggang Liu and Jian Gong: Comparison of the Flow Field in a Slab Continuous Casting Mold between the Thicknesses of 180 mm and 250 mm by High Temperature Quantitative Measurement and Numerical Simulation, Metals, 2021, 11(12): 1886-1904.

126）Xiaoqian Pan, Jian Yang*, Yinhui Zhang: Microstructure and Fracture Characteristics of Heat-Affected Zone in Shipbuilding Steel Plates with Mg Deoxidation after High Heat Input Welding, Steel Research International, 2021, 92(11): DOI: 10.1002/srin.202100376. 2100376-2100391.

127）Runhao Zhang, Jian Yang*, Han Sun, Wenkui Yang: Kinetics of Dephosphorization at Different Slag Basicities in the Double Slag Converter Steelmaking Process, Steel Research International, 2021, 92(11): DOI: 10.1002/srin.202100256. 2100256-2100268.

128）Xiaoqian Pan, Jianjun Zhi, Zhengjie Fan, Yinhui Zhang, Jian Yang*: Relationship between the Microstructure and Impact Toughness of the Coarse-Grained Heat-Affected Zone for Offshore Engineering Steels with Different Mg Contents, Steel Research International, 2021, 92(10): DOI: 10.1002/srin.202100099. 2100099-2100112.

129）Wenkui Yang, Jian Yang*, Runhao Zhang, Han Sun: Microstructure and Viscosity of Dephosphorization Slag in New Double Slag Converter Steelmaking Process, ISIJ International, 2021, 61 (10): 2490–2500.

130）Runhao Zhang, Jian Yang*, Wenkui Yang, Han Sun: Kinetic Model of Dephosphorization in the New Double Slag Converter Steelmaking Process, Ironmaking & Steelmaking, 2021, 48(10): 1277-1290.

131）Wenkui Yang, Jian Yang*, Runhao Zhang, and Han Sun: Effect of the Initial P Content on Dephosphorization of Hot Metal with Low Basicity Slag at 1623 K, Steel Research International，2021, 92(9): DOI: 10.1002/srin.202100066. 2100066-2100076.

132）Wen-kui Yang, Jian Yang*, Run-hao Zhang, Han Sun, Yun-long Qiu: Effect of the Basicity on Mineralogical Phases and Micro-Structure of Dephosphorization Slag in the New Double Slag Converter Steelmaking Process, Metals, 2021, 11(9): 1480-1494.

133）Si-wei Wu, Jian Yang*, and Guang-ming Cao：Prediction of the Charpy V-notch impact energy of low carbon steel using a shallow neural network and deep learning, International Journal of Minerals, Metallurgy and Materials, 2021, 28(8): 1309-1320. (2022年3月31日，IJMMM2021年度发表文章被引排行前二十名（排名第三名）)

134）Yang Jian *, Wu Siwei: Research progress on performance prediction of steel rolling process based on machine learning, Steel, 2021, 56 (9): 1-9.

135）Xiaoqian Pan, Jian Yang*, Qingdong Zhong, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong: Effects of Coarse Particles, Prior Austenite Grains, and Microstructures on Impact Toughness in Heat-Affected Zone of Mg Deoxidation Steel Plates without or with Al Addition, Ironmaking & Steelmaking, 2021, 48(8): 962-972.

136）Yang Jian, Cai Wenjing: Effects of Magnesium Treatment on Inclusions and HAZ Structure and Properties in Steel, Steel, 2021, 56 (7): 13-24.

137）Dekun Liu, Jian Yang*, Yinhui Zhang, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong: Effect of Welding Heat Input on the Microstructure and Impact Toughness of HAZ in 420 MPa-Grade Offshore Engineering Steel, Frontier in Materials, 2021, 8(7): 694586-694600. IF=3.54

138）Han Sun, Jian Yang*, Xinwu Lu, Wanshan Liu, Gefan Ye, Runhao Zhang, Wenkui Yang: Dephosphorization in Double Slag Converter Steelmaking Process at Different Temperatures by Industrial Experiments, Metals, 2021, 11(7), 1030-1052.

139）Yang Zhijun, Zhang Runhao, Yang Jian *, Yang Wenkui, Sun Han, Gao Fubin: Influence of Basicity and Total Iron Content on the Phase of Phosphorus Removal Slag in New Double Slag Converter Steelmaking, Steelmaking, 2021, 37 (6): 15-21.

140）Siwei Wu, Jian Yang*: A convolutional Neural Network-Based Model for Predicting Lime Utilization Ratio in the KR Desulfurization Process, Metallurgical Research & Technology, 2021, 118(6): 603-620.

141）Zhou Yangpeng, Yang Jian *, Zheng Lei, and Zhenbao, Zuo Shuai: Evolution of Inclusions in the Continuous Casting Process of Wind Tower Plate Steel, Steelmaking, 2021, 37 (5): 50-59.

142）Huang Shuyuan, Yang Jian *, Li Guangbang, Kang Wei, Liao Xiangwei, Tian Yong: Distribution of inclusions in non steady state continuous casting slabs of thin slab continuous casting machines, Steelmaking, 2021, 37 (5): 67-75.

143）Liu Yibo, Yang Jian *: Progress in Flow Field Control Technology for Tundishi, Continuous Casting, 2021, (5): 12-33. Top 5 Best Papers in Continuous Casting Journal in 2021

144）Han Sun, Jian Yang*, Runhao Zhang, Wenkui Yang: Effect of Slag Basicity on Dephosphorization at Lower Basicity and Lower Temperature Based on Industrial Experiments and Ion-Molecular Coexistence Theory, Metallurgical and Materials Transactions B, 2021, 52B(5): 3403-3422.

145）Xiaoqian Pan, Jian Yang*, Yinhui Zhang, Joohyun Park, Hideki Ono: Influence of the Mg Content on the Austenite Grain Growth in Heat-Affected Zone of Offshore Engineering Steels Considering TiN Particle Pinning and Mo Solute Drag Effects, Metallurgical Research & Technology, 2021, 118(4): 409-423.

146）Huang Shuyuan, Luo Gang, Yang Jian *, Xu Gangjun, Zhou Junjun, Zheng Qing: Effect of Oxygen Content on the Evolution of Inclusions in Ultra Low Carbon Steel Continuous Casting Process, Steelmaking, 2021, 37 (4): 38-48.

147）Xiaoqian Pan, Jian Yang*, Yinhui Zhang, Longyun Xu and Rongbin Li: Effects of Al addition on austenite grain growth, submicrometre and nanometre particles in heat-affected zone of steel plates with Mg deoxidation, Ironmaking & Steelmaking, 2021, 48(4): 417-427.

148）Ma Chao, He Wenyuan, Qiao Huanshan, Zhao Changliang, Yang Jian *: Influence of Large Scale Changes in SEN Outlet Angle on the Flow Field of Wide Plate Continuous Casting Mold, Steelmaking, 2021, 37 (4): 16-24.

149）Zhou Yangpeng, Yang Jian *, Lu Xinwu, Liu Wanshan: Mechanism and Improvement of Rod Corrosion in Calcium Treated Low alloy High Strength Steel Continuous Casting Process, Steelmaking, 2021, 37 (3): 44-50+57.

150）Wenkui Yang, Jian Yang*, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Han Sun: Effect of the Fe₂O₃ Addition Amount on Dephosphorization of Hot Metal with Low Basicity Slag by High-Temperature Laboratorial Experiments, Metals, 2021, 11(3): 417-433.

151）Chao Ma, Wenyuan He, Huanshan Qiao, Changliang Zhao, Yibo Liu, Jian Yang*: Flow Field in Slab Continuous Casting Mold with Large Width Optimized with High Temperature Quantitative Measurement and Numerical Calculation, Metals, 2021, 11(2): 261-280.

152）Yinhui Zhang, Jian Yang*, Dekun Liu, Xiaoqian Pan and Longyun Xu: Improvement of Impact Toughness of the Welding Heat-Affected Zone in High-Strength Low-Alloy Steels through Ca Deoxidation, Metallurgical and Materials Transactions A, 2021, 52A(2): 668-679.

153）Gefan Ye, Jian Yang*, Runhao Zhang, Wenkui Yang and Han Sun: Behavior of Phosphorus Enrichment in Dephosphorization Slag at Low Temperature and Low Basicity, International Journal of Minerals, Metallurgy and Materials, 2021, 28(1): 66-75.

154）Tao Zhang, Jian Yang*, Gangjun Xu, Hongjun Liu, Junjun Zhou, Wei Qin: Effects of Operating Parameters on the Flow Field in Slab Continuous Casting Molds with Narrow Widths, International Journal of Minerals, Metallurgy and Materials, 2021, 28(2): 238-248.

155）Li Tingting, Yang Jian *, Huang Fuxiang, Zhu Keran, Pei Xingwei: Overview of the Formation Mechanism and Control Technology of Solidification Hooks in Continuous Casting Slabs, Steelmaking, 2021, 37 (1): 44-56.

156）Cai Wenjing, Yang Jian *, Deng Liqin, Zuo Kanglin, Wu Xufeng: Overview of the mechanism and control technology of corner transverse cracking in continuous casting Slabs of peritectic steel, Steelmaking, 2021, 37 (2): 37-46+57

157）Wenkui Yang, Jian Yang*, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang，Gefan Ye. Effect of Basicity on Dephosphorization of Hot Metal with a Low Basicity Slag at 1653 K, Ironmaking & Steelmaking, 2021, 48(1), 69-77.

158）Wenkui Yang, Jian Yang*, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Gefan Ye：Effect of Temperature on Dephosphorization of Hot Metal in Double-Slag Converter Steelmaking Process by High-Temperature Laboratorial Experiments, Steel Research International, 2021, 92(3): DOI: 10.1002/srin.202000438. 2000438-2000449. (2022年4月1日，Top Cited Article 2020-2021，STEEL RESEARCH INTERNATIONAL)

159）Siwei Wu, Jian Yang*, Guangming Cao, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong: Elevating Prediction Performance for Mechanical Properties of Hot-Rolled Strips by Using Semi-supervised Regression and Deep Learning, IEEE ACCESS, 2020, 8(1): 134124-134136.

160）Xu Longyun, Yang Jian *, Wang Ruizhi: Effect of Mg Deoxidized Inclusions on the Microstructure of High Energy Welding HAZ, Journal of Engineering Science, 2020, 42 (S1): 9-13.

161）Xiaoqian Pan, Jian Yang*, Joohyun Park, Hideki Ono: Distribution Characteristics of Inclusions Along with the Surface Sliver Defect on the Exposed Panel of Automobile: A Quantitative Electrolysis Method, International Journal of Minerals, Metallurgy and Materials, 2020, 27(11): 1489–1498.

162）Xu Longyun, Yang Jian*: Effects of Mg Content on Characteristics of Nanoscale TiN Particles and Toughness of Heat-Affected Zones of Steel Plates after High-Heat-Input Welding, Metallurgical and Materials Transactions A, 2020, 51A(9): 4540-4548.

163）Xiaoqian Pan, Jian Yang*: Probable Maximum Sizes of Inclusions Predicted by SEV and PSD for BH Steels of Automobile Exposed Panel with Different Sulfur Content, Metals, 2020, 10(5): 637-647.

164）Siwei Wu, Jian Yang*, Runhao Zhang and Hideki Ono: Prediction of Endpoint Sulfur Content in KR Desulfurization Based on the Hybrid Algorithm Combining Artificial Neural Network with SAPSO, IEEE ACCESS, 2020, 8(1): 33778-33791.

165）Jiang Peng, He Wenyuan, Qiao Huanshan, Zhao Changliang, Zhang Tao, Yang Jian *: Optimization of Flow Field and SEN Outlet Shape in Automotive Exposed Panel Continuous Casting Mold, Steelmaking, 2020, 36 (1): 34-42+56.

166）Siwei Wu, Jian Yang* and Zhenyu Liu: Composition-Processing-Property Correlation Mining of Nb-Ti Microalloyed Steel Based on Industrial Data, Materials Transactions, 2020, 61(4): 691-699.

167）Longyun Xu, Jian Yang*, Joohyun Park, Hideki Ono: Mechanism of Improving Heat-Affected Zone Toughness of Steel Plate with Mg Deoxidation after High-Heat-Input Welding, Metals, 2020, 10(2):162-177.

168）Peng Jiang, Jian Yang*, Tao Zhang, Gangjun Xu, Hongjun Liu, Junjun Zhou, Wei Qin: Optimization of Flow Field in Slab Continuous Casting Mold with Medium Width Using High Temperature Measurement and Numerical Simulation for Automobile Exposed Panel Production, Metals, 2020, 10(1): 9-25.

169）Yinghui Zhang, Jian Yang*, Longyun Xu, Yunlong Qiu, Guoguang Cheng, Meiyi Yao and Jianxin Dong: The Effect of Ca Content on the Formation Behavior of Inclusions in the Heat Affected Zone of Thick High-Strength Low-Alloy Steel Plates after Large Heat Input Weldings, Metals, 2019, 9(12): 1328-1345.

170）Yinghui Zhang and Jian Yang*: CALPHAD-based Alloy Design of Cast Austenitic Heat-resistant Steels with Enhanced Strength at 1000 °C, Calphad, 2019, 67(12): 101679-101690.

171）Pan Xiaoqian, Yang Jian *, Zhi Jianjun, Wang Ruizhi, Fan Zhengjie, Xu Longyun: Evolution of inclusions in the refining process of BH steel for ultra-low carbon automotive exposed panels, Steel, 2019, 54 (8): 48-57.

172）Ye Gefan, Yang Jian *, Lu Xinwu, Wang Hui, Liu Wanshan, Zhang Runhao, Yang Wenkui: Influence of process parameters on the dephosphorization effect of converter under low temperature and low basicity conditions, Steelmaking, 2019, 35 (6): 16-23.

173）Siwei Wu, Jiakuan Ren, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu, Jian Yang*: Comparisons of Different Data-driven Modeling Techniques for Predicting Tensile Strength of X70 Pipeline Steels, Transactions of the Indian Institute of Metals, 2019, 72(5): 1277-1288.

174）Tao Zhang, Jian Yang*, Peng Jiang: Measurement of Molten Steel Velocity near the Surface and Modeling for Transient Fluid Flow in the Continuous Casting Mold, Metals, 2019, 9(1): 36-51.

175）Longyun Xu, Jian Yang* and Ruizhi Wang: Influence of Al Content on the Inclusion-Microstructure Relationship in the Heat-Affected Zone of a Steel Plate with Mg Deoxidation after High-Heat-Input Welding, Metals, 2018, 8(12): 1027-1042.

176）Yinhui Zhang, Jian Yang*: Formation of Nb(C,N) Carbonitride in Cast Austenitic Heat-Resistant Steel during Directional Solidification under Different Withdraw Rates, Materials, 2018, 11(12): 2397-2414.

177）Yinhui Zhang, Jian Yang*: Effect of N/C Ratio on Precipitation Behavior of (Cr,Fe)23C6 Carbide in Novel Cast Austenitic Heat-Resistant Steels during Directional Solidification, Metals, 2018, 8(9): 678-693.

178）Ruizhi Wang, Jian Yang*, Longyun Xu: Improvement of Heat-Affected Zone Toughness of Steel Plates for High Heat Input Welding by Inclusion Control with Ca Deoxidation, Metals, 2018, 8(11): 946-961.

179）Longyun Xu, Jian Yang*, Ruizhi Wang, Wanlin Wang, Yunan Wang: Effect of Mg Addition on Formation of Intragranular Acicular Ferrite in Heat-affected Zone of Steel Plate after High-Heat-Input Welding, Journal of Iron and Steel Research International, 2018, 25(4): 433-441. （2020 Best Paper Award of Journal of Iron and Steel Research International）

180）Wang Ruizhi, Yang Jian *, Zhi Jianjun: Effect of Ce Content on Inclusions in the Heat Affected Zone of EH40 Shipbuilding Plate Steel, Steelmaking, 2018, 34 (3): 48-55.

181）Wang Ruizhi, Yang Jian *: Influence of Ca based oxide metallurgy process on inclusions and microstructure [J], Steelmaking, 2017, 33 (5): 39-45.

182）Longyun Xu, Jian Yang*, Ruizhi Wang, Wanlin Wang, Zhongmin Ren: Effect of Welding Heat Input on Microstructure and Toughness of Heated-affected Zone in Steel Plate with Mg Deoxidation, Steel Research International, 2017, 88(12): 1700157.

183）Xu Longyun, Yang Jian *, Wang Ruizhi, Wang Wanlin: Effect of Mg Content on Inclusions and Microstructure in Welding Heat Affected Zone, Steelmaking, 2017, 33 (5): 19-23.

184）Yuanyuan Yan, Gaofei Liang, Jian Yang*: Cause of Stamping Cracks on Pure Iron Magnetic Shielding Covers, Baosteel Technical Research, 2016, 10(4)：12-17.

185）Xiu-ling Xin, Jian Yang*, Yun-nan Wang, Rui-zhi Wang, Wan-lin Wang, Hong-guang Zheng, and Han-tao Hu: Effects of Al content on non-metallic inclusion evolution in Fe-16Mn-xAl-0.6C high Mn TWIP steel, Ironmaking and Steelmaking, 2016, 43(3): 234-242.

186）Longyu Xu, Jian Yang*, Ruizhi Wang, Yunan Wang, and Wanlin Wang: Effect of Mg Content on the Microstructure and Toughness of Heat-Affected Zone of Steel Plate after High Heat Input Welding, Metallurgical and Materials Transactions A, 2016, 47(7): 3354-3364.

187）Wanlin Wang，Jingwen Li，Lejun Zhou，Jian Yang : Effect of MnO Content on the Interfacial Property of Mold Flux and Steel, Met. Mater. Int.，2016，22(4): 700~706. （2017 Best Paper Award of Korea Institute of Metals and Materials）

188）Wang Ruizhi, Yang Jian *, Zhu Kai, Wang Yunan: Comparison of the effects of oxide metallurgy processes for calcium deoxidation and magnesium deoxidation, Steelmaking, 2016, 32 (3): 50-54.

189）Yunan Wang, Jian Yang*, Ruizhi Wang, Xiuling Xin, and Longyun Xu: Effects of Non-Metallic Inclusions on Hot Ductility of High Manganese TWIP Steels Containing different Aluminum Contents，Metallurgical and Materials Transactions B, 2016, 47(3): 1697-1712.

190）Yunan Wang, Jian Yang*, Xiuling Xin, Ruizhi Wang, and Longyun Xu: The Effect of Cooling Conditions on the Evolution of Non-metallic Inclusions in High Manganese TWIP Steels. Metallurgical and Materials Transactions B, 2016, 47(2): 1378-1389.

191）Yang Jian, Ruan Xiaoming, Wang Ruizhi, Zhu Kai, Li Chengbin, Fan Zhengjie: Influence of Mn Content on the Characteristics of Continuous Casting Slab, Continuous Casting, 2016, 41 (1): 1-5

192）Jian Yang, Longyun Xu, Kai Zhu, Ruizhi Wang, Lejun Zhou, and Wanlin Wang: Improvement of HAZ Toughness of Steel Plate for High Heat Input Welding by Inclusion Control with Mg Deoxidation. Steel Research International, 2015, 86(6): 619-625.

193）Jian Yang, Yu-nan Wang, Xiao-ming Ruan, Rui-zhi Wang, Kai Zhu, Zheng-jie Fan, Ying-chun Wang, Cheng-bin Li, and Xiao-fang Jiang: Effects of Manganese Content on Solidification Structures, Thermal Properties, and Phase Transformation Characteristics in Fe-Mn-C Steels, Metallurgical and Materials Transactions B, 2015, 46(3): 1353-1364.

194）Jian Yang, Yu-nan Wang, Xiao-ming Ruan, Rui-zhi Wang, Kai Zhu, Zheng-jie Fan, Ying-chun Wang, Cheng-bin Li, and Xiao-fang Jiang: Effects of Manganese Content on Solidification Structures, Thermal Properties, and Phase Transformation Characteristics in Fe-Mn-Al-C Steels, Metallurgical and Materials Transactions B, 2015, 46(3):1365-1375.

195）Yu-nan Wang, Jian Yang*, and Yan-ping Bao: Effects of Non-metallic Inclusions on Machinability of Free-cutting Steels Investigated by Nano-indentation Measurements. Metallurgical and Materials Transactions A, 2015, 46(1): 281-292.

196）Lejun Zhou, Wanlin Wang, Boxun Lu, Guanghua Wen and Jian Yang: Effect of Basicity and B2O3 on Viscosity, Melting and Crystallization Behaviors of Low Fluorine Mold Fluxes for Casting Medium Carbon Steels, Met. Mater. Int., 2015, 21(1): 126~133.

197）Yunan Wang, Jian Yang*, and Yanping Bao: Characteristics of BN Precipitation and Growth during Solidification of BN Free-machining Steel, Metallurgical and Materials Transactions B, 2014, 45(6): 2269-2278.

198）Wu Yiquan, Yang Jian, Wang Ruizhi, Zhu Kai, Zhou Lejun, Wang Wanlin: Effect of Ca Content on Inclusions in Shipbuilding Plate Structural Steel, Baosteel Technology, 2014, (4): 28-32.

199）Xu Longyun, Yang Jian, Wang Ruizhi, Zhu Kai, Zhou Lejun, Wang Wanlin: Effect of Mg Deoxygenation on the Evolution of Mg Content and Inclusions in Shipbuilding Plate Structural Steel, Baosteel Technology, 2014, (6): 7-12

200）Jian Yang, Zhigang Ma, Kai Zhu, Ruizhi Wang and Qing Zheng: Development of Oxide Metallurgy Technology at Baosteel, Baosteel Technical Research, 2012, 9(3): 41-46.

201）Wang Ruizhi, Yang Jian, Zhi Jianjun, Zhu Kai: Analysis of nodules on the upper and submerged nozzles of continuous casting tundish, Baosteel Technology, 2012, （5）: 13-16.

202）Zhu Kai, Yang Jian, Wang Ruizhi: Analysis of Failure Mechanism and Improvement Method of Heat Affected Zone in Thick Steel Plate Welding, World Steel, 2012, 12 (3): 57-61

203）Zhu Kai, Yang Jian, Wang Ruizhi, Shen Jianguo: Analysis and Countermeasures of Performance Degradation Mechanism in Heat Affected Zone of High Hear Input Welding Steel Plate, Journal of Inner Mongolia University of Science and Technology, 2012, 31 (3): 300-304

204）Kai Zhu, Jian Yang, Ruizhi Wang: Effects of Zr on Acicular Ferrite Formation in the HAZ of Ti-bearing Low Carbon Steels with High Heat Input of Weld Thermal Simulations, Baosteel Technical Research, 2012,（2）: 39-43.

205）Kai Zhu, Jian Yang, Rui-zhi Wang and Zhen-guo Yang: Effect of Mg Addition on Inhibiting Austenite Grain Growth of Ti-bearing Low Carbon Steels, Journal of Iron and Steel Research International, 2011, 18(9): 60-64.

206）Jian Yang, Kai Zhu, Ruizhi Wang and Jianguo Shen: Exellent Heat Affected Zone Toughness Technology Improved by Use of Strong Deoxidizers, Journal of Iron and Steel Research International, 2011, 18(8): 141-147.

207）Jian Yang, Kai Zhu Ruizhi Wang and Jianguo Shen：Improving the Toughness of Heat Affected Zone of Steel Plate by Use of Fine Inclusion Particles, Steel Research International, 2011, 82(5): 552-556.

208）Zhu Kai, Yang Jian, Wang Ruizhi, Shen Jianguo, Yang Zhenguo: Evaluation and Analysis Method for Fine Inclusions in Steel, Metallurgical Analysis, 2011, 31 (2): 1-7.

209）Jian Yang, Kai Zhu, Ruizhi Wang, Yi Zhang, Jianguo Shen: Excellent Heat Affected Zone Toughness Technology Improved by use of Strong Deoxidizers, Baosteel Technical Research, 2010, 4(4): 32-36.

210）Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Improvement of Grain Refining Efficiency for Mg-Al Alloy Modified by the Combination of Carbon and Calcium, Journal of Alloys and Compounds, 2009, 470(1-2): 134-140.

211）Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Effect of Strontium on the Grain Refining Efficiency of Mg-3Al Alloy Refined by Carbon Inoculation, Journal of Alloys and Compounds, 2009, 470(1-2): 228-232.

212）Jian Yang, Jian-guo Shen, Kai Zhu and Guo-dong Wang: Progress in Technology Development of Oxide Metallurgy for Manufacturing Steel Plates with Excellent HAZ Toughness, Baosteel Technical Research, 2008, 2(4): 43-50.

213）Jian Yang, Kai Zhu, Jian-guo Shen and Mamoru Kuwabara: Improvement of Steel Cleanliness by Deoxidation with Mg Vapor, Journal of Iron and Steel Research International, 2008, 15(10): 675-680.

214）Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Effects of Carbon and/or Alkaline Earth Elements on Grain Refinement and Tensile Strength of AZ31 Alloy, Materials Transactions, 2008, 49(10): 2303-2309.

215）Jun Du, Jian Yang, Mamoru Kuwabara, Wen-fang Li and Ji-hua Peng: Effect of Manganese and/or Carbon on the Grain Refinement of Mg-3Al Alloy, Materials Transactions., 2008, 49(1): 139-143.

216）Kouhei Yoshitaka, Jian Yang, Zhongzhu Liu and Mamoru Kuwabara: クロミア(Cr2O3)のAl熱還元反応の反応メカニズム, 高温学会誌, 2008, 34(1): 20-25.

217）Zhongzhu Liu, Yoshinao Kobashi, Kotobu Nagai, Jian Yang and Mamoru Kuwabara: Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel, Tetsu-to-Hagané, 2007, 93(11): 655-663.

218）Jun Du, Jian Yang, Mamoru Kuwabara, Wen-fang Li and Ji-hua Peng: Effect of Iron and/or Carbon on the Grain Refinement of Mg-3Al Alloy, Mater. Trans., 2007, 48(11): 2903-2908.

219）Jian Yang, Mamoru Kuwabara, Takashi Asano, Akihiro Chuma and J. Du: Effect of Lime Particle Size on Melting Behavior of Lime-containing Flux, ISIJ Int., 2007, 47(10): 1401-1408.

220）Jian Yang, Tomoyuki Mori and Mamoru Kuwabara: Mechanism of Carbothermic Reduction of Hematite in Hematite-Carbon Composite Pellets, ISIJ Int., 2007, 47(10): 1394-1400.

221）Tomoyuki Mori, Jian Yang and Mamoru Kuwabara: Mechanism of Carbothermic Reduction of Chromium Oxide, ISIJ Int., 2007, 47(10): 1387-1393.

222）Ryousuke Takata, Jian Yang and Mamoru Kuwabara: Characteristics of Inclusions Generated during Al-Mg Complex Deoxidation of Molten Steel, ISIJ Int., 2007, 47(10): 1379-1386.

223）Kazumasa Yasuda, Yasuo Saiki, Takasi Kubo, Mamoru Kuwabara and Jian Yang: Influence of High-Power Ultrasonic Irradiation on Primary Nucleation Process during Solidification, Jpn. J. Appl. Phys., 2007, 46(7B): 4939-4944.

224）Jian Yang, Tatsuhito Yamasaki and Mamoru Kuwabara: Behavior of Inclusions in Deoxidation Process of Molten Steel with in Situ Produced Magnesium Vapor, ISIJ Int., 2007, 47(5): 699-708.

225）Jian Yang, Mamoru Kuwabara, Takao Sakai, Naoyuki Uchida, Zhongzhu Liu and Masamichi Sano: Simultaneous Desulfurization and Deoxidation of Molten Steel with In Situ Produced Magnesium Vapor, ISIJ Int., 2007, 47(3): 418-426.

226）Jian Yang, Mamoru Kuwabara, Takashi Sawada and Masamichi Sano: Rate of Isothermal Reduction of MgO with Al, Tetsu-to-Hagané, 2007, 93(3): 201-207.

227）Susumu Mukawa, Yoshiyuki Ueshima, Masamichi Sano, Jian Yang and Mamoru Kuwabara: The Effect of Magnesium Gas Injecting Conditions on the Rate of Hot Metal Desulfurization, ISIJ Int., 2006, 46(12): 1778-1782.

228）Zhongzhu Liu, Yoshinao Kobayashi, Jian Yang, Kotobu Nagai and Mamoru Kuwabara: Effect of Nano-scale Copper Sulfide Precipitation on Mechanical Properties and Microstructure of Rapidly Solidified Steel with Tramp Copper Element, Mater. Trans., 2006, 47(9): 2312-2320.(SEM Photos Revealed on the Cover of Materials Transactions)

229）Jian Yang, Mamoru Kuwabara, Takashi Sawada and Masamichi Sano: Kinetics of Isothermal Reduction of MgO with Al, ISIJ Int., 2006, 46(8): 1130-1136.

230）Zhongzhu Liu, Yoshinao Kobayashi, Jian Yang, Kotobu Nagai and Mamoru Kuwabara: “In-situ” Observation of the delta/gamma Phase Transformation on the Surface of Low Carbon Steel Containing Phosphorus with Different Rates, ISIJ Int., 2006, 46(6): 847-853.

231）Yasuo Saiki, Takasi Kubo, Mamoru Kuwabara and Jian Yang: Acoustic-Cavitation-Based Production of Foamed Metallic Material, Jpn. J. Appl. Phys., 2006, 45(5B): 4793-4799.

232）Zhongzhu Liu, Yoshinao Kobashi, Kotobu Nagai, Jian Yang and Mamoru Kuwabara: Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel, ISIJ Int., 2006, 46(5): 744-753. (SAWAMURA Best Article Award of The Iron and Steel Institute of Japan)

233）Jian Yang, Mamoru Kuwabara, Zhongzhu Liu, Takashi Asano and Masamichi. Sano: Mechanism of Aluminothermic Reduction of MgO, Tetsu-to-Hagané, 2006, 92(4): 239-245.

234）Jian Yang, Mamoru Kuwabara, Keiji Okumura and Masamichi Sano: Effect of Operating Parameters on Resulfurization in Desulfurization Process with In Situ Produced Magnesium Vapor, Tetsu-to-Hagané, 2006, 92(4): 246-253.

235）Jian Yang, Mamoru Kuwabara, Takayuki Teshigawara and Masamichi Sano: Resulfurization Rate in Magnesium Desulfurization Process of Molten Iron, Tetsu-to-Hagané, 2006, 92(4): 254-261.

236）Jian Yang, Mamoru Kuwabara, Zhongzhu Liu, Takashi Asano and Masamichi Sano: In Situ Observation of Aluminothermic Reduction of MgO with High Temperature Optical Microscope, ISIJ Int., 2006, 46(2): 202-209.

237）Jian Yang, Mamoru Kuwabara, Keiji Okumura, Zhongzhu Liu and Masamichi Sano: Improvement of Desulfurization Efficiency of Molten Iron with Magnesium, Revue de Metallurgie, 2005, (12): 22-23.

238）Jian Yang, Mamoru Kuwabara, Keiji Okumura and Masamichi Sano: Prevention of Resulfurization in the Desulfurization Process with Magnesium Vapor Produced In Situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int., 2005, 45(12): 1795-1803.

239）Jian Yang, Mamoru Kuwabara, Takayuki Teshigawara and Masamichi Sano: Mechanism of Resulfurization in the Magnesium Desulfurization Process of Molten Iron, ISIJ Int., 2005, 45(11): 1607-1615.

240）Takasi Kubo, Mamoru Kuwabara and Jian Yang: Visualization of Acoustically Induced Cavitation Bubbles and Microjets with the Aid of High Speed Camera, Jpn. J. Appl. Phys., 2005, 44(6B): 4647-4652.

241）Jian Yang, Keiji Okumura, Mamoru Kuwabara and Masamichi Sano: Improvement of Desulfurization Efficiency of Molten Iron with Magnesium Vapor Produced In Situ by Aluminothermic Reduction of Magnesium Oxide, Metallurgical and Materials Transactions B, 2003, 34B(5): 619-629.

242）Masamichi Sano, Keiji Okumura, Jiayi Shan and Jian Yang: Iron and Steel Refining with Magnesium Vapor Injection, SEAISI Quarterly, 2003, 32(2): 12-18.

243）Takasi Kubo, Mamoru Kuwabara and Jian Yang: Analysis of the Behavior of Muti-Bubbles Generated by Acoustic Cavitations, Technical Report of IEICE (The Institute of Electronics Information and Communication Engineers), 2003, 103(11): 35-37.

244）Kenyichi Kondo, Mamoru Kuwabara and Jian Yang:：Model Experiment about Effects of Process Variables on Ultrasonic Decomposition of Chemical Substances in Wastewater, Technical Report of IEICE (The Institute of Electronics Information and Communication Engineers), 2003, 103(11): 39-42.

245）Jian Yang, Keiji Okumura, Mamoru Kuwabara and Masamichi Sano: Behavior of Magnesium in the Desulfurization Process of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 2002, 42(7): 685-693.

246）Jian Yang, Keiji Okumura, Mamoru Kuwabara and Masamichi Sano: Effects of Operating Parameters on Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 2002, 42(6): 595-602.

247）Jian Yang, Keiji Okumura, Mamoru Kuwabara and Masamichi Sano: Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 2001, 41(9): 965-973.

248）Jian Yang, Seiji Ozaki, Ryoyichi Kakimoto, Keiji Okumura, Mamoru Kuwabara and Masamichi Sano: Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Carbothermic Reduction of Magnesium Oxide, ISIJ Int. 2001, 41(9): 945-954. (SAWAMURA Best Article Award of The Iron and Steel Institute of Japan)

11. International Patents

1）YANG Jian, GAO Shan, MA Zhigang, WANG Ruizhi, ZHANG Caiyi, WANG Junkai, XU Guodong, WANG Yunan：Thick Steel Plate for High Heat Input Welding and Having Great Heat-Affected Area Toughness and Manufacturing Method Therefor, US10889874B2, Jan. 12, 2021.

2）YANG Jian, GAO Shan, MA Zhigang, WANG Ruizhi, ZHANG Caiyi, WANG Junkai, XU Guodong, WANG Yunan：Thick Steel Plate for High Heat Input Welding and Having Great Heat-Affected Area Toughness and Manufacturing Method Therefor, US10837089B2, Nov. 17, 2020.

3）YANG Jian, GAO Shan, MA Zhigang, WANG Ruizhi, ZHANG Caiyi, WANG Junkai, XU Guodong, WANG Yunan：Thick Steel Plate for High Heat Input Welding and Having Great Heat-Affected Area Tougness and Manufacturing Method Therefor, EP3395985B1, Aug. 12, 2020.

4）Jian YANG, Jianjun ZHI, Kai ZHU，Jianhua ZHU, Zhengjie FAN, Ruizhi WANG: Device and Method for Continuously Measuring Flow Rate Near Liquid Steel Surface, US9630242B2, Apr. 25, 2017.

5）Jian YANG, Jianjun ZHI, Kai ZHU，Jianhua ZHU, Zhengjie FAN, Ruizhi WANG, Jianguo SHEN, Yiyu ZHENG: Device for Measuring Flow Rate of Steel Melt near a Surface of the Steel Melt, US9631958B2, Apr. 25, 2017.

6）Jian YANG, Jianjun ZHI, Kai ZHU，Jianhua ZHU, Zhengjie FAN, Ruizhi WANG, Jianguo SHEN, Yiyu ZHENG: DEVICE AND METHOD FOR MEASURING FLOW RATE NEAR LIQUID STEEL SURFACE，EP2924443B1，2019.09.18.

7）Jian YANG, Jianjun ZHI, Kai ZHU，Jianhua ZHU, Zhengjie FAN, Ruizhi WANG: DEVICE AND METHOD FOR CONTINUOUSLY MEASURING FLOW RATE NEAR LIQUID STEEL SURFACE, EP2924442B1, 2020.11.11

12. Chinese Patents

1.徐龙云，杨健，孙勇彪：一种特厚连铸板坯全厚度方向夹杂物平面分布的检测方法，申请号：202511398671.2，申请日：2025年9月28日。

2.徐龙云，杨健，孙勇彪：一种钢中夹杂物数量密度、尺寸与成分面分布云图的制作方法，申请号：202511398675.0，申请日：2025年9月28日。

3.杨健，杨文魁，张润颢，孙晗，宋景凌，朱庆桂，周旋，李恒华，刘合萍：一种对钢中夹杂物进行观察分析的方法，专利号：ZL202310019092.7，授权日期：2025.8.29。

4.杨健，李赟通，丁中，李洪翠，马海涛，赵孝伦，陈耀，李彩霞：一种基于计算流体力学的连铸保护渣卷渣量的计算方法，申请号：202510640286.8，申请日：2025年5月19日。

5.杨健，李赟通，丁中，刘飞，陈传磊，曹运涛，赵珉，殷树春：一种抑制保护渣卷渣的连铸工艺优化方法，申请号：202510640285.3，申请日：2025年5月19日。

6.蔡大为，杨健，孙晗，彭杨，莫剑雄，张都，王建华，徐龙云，周正豪，赵济民：一种考虑电炉前-中-后服役周期炉膛变化的碱度动态调整方法，申请号：202510022917.X。

7.蔡大为，杨健，孙晗，彭杨，莫剑雄，张都，徐龙云，周正豪，赵济民，王建华：一种考虑电炉服役期炉膛变化的脱磷方法，申请号：202510022913.1。申请日：2025-01-07。

8.杨健，李婷婷，杨晓江，单庆林，潘红伟，汪洪峰，李荣斌：一种热镀锌汽车外板表面保护渣型线状缺陷的检测方法，ZL 202111633676.0，授权日期：2024.8.20。

9.杨健，张润灏，孙晗：一种不同温度下双渣法转炉炼钢富磷能力和流动性优异的脱磷渣及脱磷方法，ZL2024101804259，授权日：2024年2月18日。

10.杨健，张玉旗，张银辉，李婷婷，陈妍利：一种大线能量焊接热影响区韧性优异的钢板及其制造方法，申请号：2024101870814，申请日：2024年2月20日。

11.杨健，张玉旗，张银辉，李婷婷，陈妍利：一种大线能量焊接性能优异的钢板及其制造方法，申请号：202410187073X，申请日：2024年2月20日。

12.杨健，张润灏，孙晗：一种双渣法转炉炼钢的脱磷方法，申请号：2024101804136，申请日：2024年2月18日。

13.杨健，李婷婷，陈妍利，张玉旗：一种提高大线能量焊接用钙处理厚钢板及其制造方法，申请号：2024101870602，申请日：2024年2月20日。

14.杨健，李婷婷，张玉旗，陈妍利，赵长亮，何文远，刘延强：一种大线能量焊接用钙处理厚钢板及其制造方法，申请号：2024101870439，申请日：2024年2月20日。

15.杨健，陈妍利，李婷婷，张玉旗，赵长亮，何文远，刘延强：一种大线能量焊接热影响区韧性优异的钙处理厚钢板及其制造方法，申请号：2024101870299，申请日：2024年2月20日。

16.杨健，孙晗，张润灏：一种同时提高低碳双渣法转炉炼钢脱磷期脱磷率和倒渣率的方法，申请号：2024101802925，申请日：2024年2月18日。

17.杨健，张青，李婷婷：一种热轧板表面条状缺陷的非水定量电解分析方法，申请号：2024101802696，申请日：2024年2月18日。

18.杨健，张青，李婷婷：一种低碳钢板坯连铸坯凝固钩组织的侵蚀方法，申请号：202210261297.1，申请日期：2022.3.16。

19.杨健，张青，李婷婷：一种超低碳钢板坯连铸坯凝固钩组织的侵蚀方法，申请号：202210259764.7，申请日期：2022.3.16。

20.杨健，潘晓倩，李荣斌：一种热镀锌汽车外板表面含Al2O3夹杂线状缺陷的检测方法，申请号：202111633810.7，申请日期：2021.12.29。

21.杨健，张涛，陈军利，李太全，蒋鹏，马超，刘逸波：中等断面板坯结晶器钢液流场形态的控制方法，申请号：202110652313.5，申请日期：2021.6.12。

22.杨健，孙晗，张润灏，叶格凡，杨文魁：双渣法转炉炼钢工艺脱磷渣碱度的控制方法，申请号：202010926690.9，申请日期：2020.9.7。

23.杨健，叶格凡，张润灏，杨文魁，孙晗：双渣法转炉炼钢工艺促进脱磷期石灰化渣的方法，申请号：202010926687.7，申请日期：2020.9.7。

24.杨健，蒋鹏，张涛，徐刚军，刘红军，周军军，秦伟，郑庆：板坯结晶器流场形态的判定方法，申请号：202010595223.2，申请日期：2020.6.28。

25.杨健，蒋鹏，张涛：结晶器表面附近钢液流速的测量方法， 申请号：202010595249.7，申请日期：2020.6.28。

26.杨健; 高珊; 马志刚; 王睿之; 张才毅; 王俊凯; 徐国栋; 王毓男：一种大线能量焊接热影响区韧性优异的厚钢板及其制造方法，申请号：201510974660.4，申请日期：2015.12.24。

27.杨健; 高珊; 马志刚; 王睿之; 张才毅; 王俊凯; 徐国栋; 王毓男：一种大线能量焊接热影响区韧性优异的厚钢板及其制造方法，申请号：201510971509.5，申请日期：2015.12.24。

28.甘菲芳, 金从进, 姚金甫, 赵明, 郑庆, 马志刚, 杨健：一种RH浸渍管热态喷补料及其使用方法，申请号201510534643.9，受理日期，2015-8-27。

29.胡汉涛，马志刚，吴雄，杨健，徐国栋，王睿之，王国栋，王俊凯：一种管线钢的钙处理方法，申请号：201410499661.3，申请日期：2014.9.25。

30.金从进;何平显;沈钟铭;甘菲芳;姚金甫;杨健;职建军;王峰 :一种抗渣侵蚀好的尖晶石质可塑料及制备方法, 申请号：201410371192.7。申请日期：2014-07-31。

31.杨健，高珊，祝凯，张才毅，王睿之，马志刚，徐国栋，王俊凯：一种低碳当量可大线能量焊接用厚钢板及其制造方法，专利号：ZL201410699767.8 ，授权公告日：2017-2-22。

32.杨健，高珊，祝凯，张才毅，王睿之，马志刚，徐国栋，王俊凯：一种可大线能量焊接用厚钢板及其制造方法，中国专利，专利号：ZL201410699768.2，授权公告日：2017-1-25。

33.杨健; 高珊; 马志刚; 祝凯; 张才毅; 王睿之; 王俊凯; 徐国栋：一种焊接热影响区韧性优异的厚钢板及其制造方法，中国专利，专利号：ZL201310712505.6，授权公告日：2016-6-22。

34.杨健; 高珊; 马志刚; 祝凯; 张才毅; 王睿之; 王俊凯; 徐国栋：一种低碳当量焊接热影响区韧性优异的厚钢板及其制造方法，中国专利，专利号：ZL201310711812.2，授权公告日：2016-8-17。

35.甘菲芳，赵明，姚金甫，金从进，郑庆，马志刚，杨健，刘继鸣，王峰：一种MgO-Al2O3质高温热态修补材料及其使用方法，专利号：201310712289.5。授权公告日：2017-6-6。

36.杨健，职建军，祝凯，朱建铧，范正洁，王睿之，沈建国，郑贻郁：钢液表面附近流速的测量装置和方法，中国专利，专利号：ZL201210485150.7，授权公告日：2016-6-29。

37.杨健，职建军，祝凯，朱建铧，范正洁，王睿之：一种钢液表面附近流速的连续测量装置和方法，中国专利，专利号：ZL201210487402.X，授权公告日：2016-7-6。

38.杨健，祝凯，王睿之，马志刚： 一种大线能量焊接厚钢板及其制造方法 ，专利号：ZL 201210062696.1，授权日期：2014-03-19。

39.杨健，祝凯，王睿之，马志刚： 一种大线能量焊接用厚钢板及其制造方法，专利号：ZL 201210062515.5A。，授权日期：2014-06-04。

40.郑宏光; 李元; 马天军; 杨健; 朱信国; 刘旭峰; 范正洁; 沈建国:一种高强度镍基耐蚀合金及其制造方法, 专利号：ZL 201110209582.0，授权日期：2014-10-1。

41.郑宏光，李元，朱信国，杨健，刘旭峰，陆建生：一种超低氧低膨胀合金的制造方法，专利号：ZL 201110310398.5Â，授权日期：2013-3-13。

42.郑庆，杨健：一种钢铁生产过程用于细化析出物的合金及其使用方法，发明专利，申请号201110080313.9，申请日期：2011-03-31。

43.杨健，祝凯，王睿之，张毅、王国栋、沈建国：一种利用钢中纳米析出物提高厚钢板大线能量焊接性能的方法, 发明专利，ZL201010263961.3。授权日期：2013-11-20。

44.杨健，祝凯，王睿之，张毅、王国栋、沈建国：大线能量焊接用厚钢板中纳米析出物的控制方法, 专利号：ZL 201010207119.8Â，授权日期：2012-10-10。

45.杨健，祝凯，王睿之，沈建国：大线能量焊接用厚钢板的夹杂物控制方法，专利号：ZL 201010122508.0Â，授权日期：2012-11-14。

46.杨健，祝凯，王睿之，沈建国：一种提高厚钢板大线能量焊接性能的方法，专利号：ZL 201010122506.1Â ，授权日期：2012-09-11。

47.杨健，祝凯，沈建国：可大线能量焊接厚钢板制造过程中添加镁的方法，专利号：ZL 200810201494.4Â， 授权日期：2011-11-23。

48.杨健：一种利用铝热还原反应对炼钢渣改质的方法，专利号：ZL 200810203533.4，授权日期：2011-07-13

49.贺万宁，杨健，帅志泉，李宗雄：高收率制取高纯硫酸锰溶液，国家发明专利授权，ZL92112673.5。

50.杨健，李宗雄，贺万宁：用软锰矿生产高纯碳酸锰的方法，国家发明专利授权，ZL94113105.X。